Garmin GPS 155/165 TSO Скачать руководство пользователя

Страница: 90 / 132

The SID select page also allows you to review all the available SIDs for the departure

airport and select, delete or change the active SID.

To replace the active SID with another SID:

1. Press

and rotate

until the SID Select page appears.

2. Press

and rotate

to select the desired new SID. Press

To delete the active SID:

1. Press

and rotate

until the SID Select page appears.

2. Press

. The active SID (denoted by an asterisk) will flash.

3. Press

, followed by

. The SID waypoints will be removed from the active route.

SIDs can also be selected and deleted from storage routes through the Route Catalog page.

To select a SID from the Route Catalog page:

1. Display the desired route on the Route Catalog page.

2. Select ‘sid?’ in the route action field and press

3. Select the desired SID and transitions.

4. The SID waypoints will be inserted into the route and the Route Review page will be displayed.

To replace a SID from the Route Catalog page:

1. Display the desired route on the Route Catalog page.

2. Select ‘sid?’ in the route action field and press

3. Select the desired new SID and transitions.

4. The SID waypoints will be inserted into the route and the Route Review page

will be displayed.

APPROACH NAVIGATION

Selecting & Deleting SIDs

SIDs may be saved with any stored route.

The SID select page allows you to select a new
SID on the fly.

155man (GOOD) 7/24/98 1:57 PM Page 80

Содержание GPS 155/165 TSO





































































































































Результаты поиска

Содержание GPS 155/165 TSO

Отзывы:

Похожие инструкции для GPS 155/165 TSO

Бренды по названию

Популярные бренды

Garmin GPS 155/165 TSO, Руководство пользователя

Результаты поиска

Содержание GPS 155/165 TSO

Отзывы:

Похожие инструкции для GPS 155/165 TSO

Бренды по названию

Популярные бренды