manualshive.com logo in svg

Garmin GNS 530, Руководство по установке

"Garmin GNS 530 - пилотский мануал и справочник, доступен для загрузки бесплатно на manualshive.com. Установите руководство для использования и настройки вашего Garmin GNS 530 для безопасных и эффективных полетов. Скачайте его прямо сейчас и получите всю необходимую информацию для использования этого устройства на борту."

Поделиться
Скачать
background image

Page 1-8 

 

500 SERIES INSTALLATION MANUAL 

Rev Q 

 

190-00181-02 

The FDE function is built into the GPS 500/GNS 530 and does not require pilot interaction.  In contrast, 
the FDE Prediction Program does require pilot interaction and must be used prior to oceanic/remote area 
flights to predict FDE availability. 

The 500 Series Trainer software includes an FDE Prediction Program to meet the requirements for GPS as 
a primary means of navigation for oceanic/remote operations per N8110.60.  The oceanic flight phase 
occurs on the GPS 500/GNS 530 when more than 200 nautical miles from the nearest airport. 

All operators using the GPS 500/GNS 530 as primary means of navigation in oceanic/remote areas under 
FAR parts 91, 121, 125 and 135 must utilize the FDE Prediction Program prior to conducting a flight in 
these areas. 

1.8 LIMITED 

WARRANTY 

This Garmin product is warranted to be free from defects in materials or workmanship for two years from 
the date of purchase.  Within this period, Garmin will at its sole option, repair or replace any components 
that fail in normal use.  Such repairs or replacement will be made at no charge to the customer for parts or 
labor, provided that the customer shall be responsible for any transportation cost.  This warranty does not 
cover failures due to abuse, misuse, accident or unauthorized alteration or repairs. 

THE WARRANTIES AND REMEDIES CONTAINED HEREIN ARE EXCLUSIVE AND IN LIEU OF 
ALL OTHER WARRANTIES EXPRESS OR IMPLIED OR STATUTORY, INCLUDING ANY 
LIABILITY ARISING UNDER ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A 
PARTICULAR PURPOSE, STATUTORY OR OTHERWISE.  THIS WARRANTY GIVES YOU 
SPECIFIC LEGAL RIGHTS, WHICH MAY VARY FROM STATE TO STATE. 

IN NO EVENT SHALL GARMIN BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT OR 
CONSEQUENTIAL DAMAGES, WHETHER RESULTING FROM THE USE, MISUSE, OR 
INABILITY TO USE THIS PRODUCT OR FROM DEFECTS IN THE PRODUCT.  Some states do not 
allow the exclusion of incidental or consequential damages, so the above limitations may not apply to you. 

Garmin retains the exclusive right to repair or replace the unit or software or offer a full refund of the 
purchase price at its sole discretion. SUCH REMEDY SHALL BE YOUR SOLE AND EXCLUSIVE 
REMEDY FOR ANY BREACH OF WARRANTY. 

To obtain warranty service, contact your local Garmin Authorized Service Center.  For assistance in 
locating a Service Center near you, call Garmin Customer Service at one of the numbers shown below. 

Products sold through online auctions are not eligible for rebates or other special offers from Garmin. 
Online auction confirmations are not accepted for warranty verification. To obtain warranty service, an 
original or copy of the sales receipt from the original retailer is required. Garmin will not replace missing 
components from any package purchased through an online auction. 

Garmin International, Inc. 

Garmin (Europe) Ltd. 

1200 East 151

st

 Street 

Unit 4, The Quadrangle, Abbey Park Industrial Estate 

Olathe, Kansas 66062, U.S.A. 

Romsey, SO51 9DL, U.K. 

Phone:

913/397.8200 Phone: 

44/0870.851241 

FAX: 913/397.0836 

FAX: 44/0870.851251 

Содержание GNS 530














































































































































Отзывы:

Нет отзывов

Похожие инструкции для GNS 530

Barco CHDD–268 Specifications preview
CHDD–268
Бренд: Barco Страницы: 2
ViewSonic VA903B - 19" LCD Monitor Specifications preview
VA903B - 19" LCD Monitor
Бренд: ViewSonic Страницы: 2
ViewSonic VA903B - 19" LCD Monitor User Manual preview
VA903B - 19" LCD Monitor
Бренд: ViewSonic Страницы: 25
ViewSonic VG930M - 19" LCD Monitor Service Manual preview
VG930M - 19" LCD Monitor
Бренд: ViewSonic Страницы: 86
Barco FDU-2129 Brochure & Specs preview
FDU-2129
Бренд: Barco Страницы: 4
Nordcap 4554642052 Installation And Use Manual preview
4554642052
Бренд: Nordcap Страницы: 12

Бренды по названию

Популярные бренды

Загрузить еще бренды