Garmin GNS 400W Скачать руководство пользователя страница 130

Страница: 130 / 220

6 - WPT PAGES

120

190-00356-00 Rev G

Airport Location

Airport Location Page

The

airport location page

displays the latitude, lon-

gitude, and elevation of the selected airport. The

air-

port location page

also displays facility name and loca-

tion, as well as fuel availability, available approaches,
radar coverage and airspace type.

Facility Name and

Location (city)

Airport Identifier,

Symbol and Type

Latitude/Longi-

tude Position

First Page

in WPT group

Best Available
Approach and

Radar Coverage

Field Elevation,

Available Fuels and

Airspace Type

The following descriptions and abbreviations are

used:

• Type—

Usage type: Public, Military, Heliport,
or Private

• Position— Latitude/Longitude (degrees/minutes

or degrees/minutes/seconds), MGRS
or UTM/UPS

• Elevation— In feet or meters
• Fuel—

For public-use airports, the avail-
able fuel type(s) are: Avgas (80-
87/100LL/100-130/Mogas), Jet, or
None

• Approach— Best available approach: ILS,

MLS, LOC, LDA, SDF, GPS, VOR,
RNAV (“RNV”), LORAN (“LOR”),
NDB, TACAN (“TCN”), Helicopter

(“HEL”), or VFR

• Radar—

Radar coverage: Yes or No

• Airspace— Control environment: CTA, TMA,

TRSA, Class B, Class C, Class D, or
none

Airport Location Page Options

Select Next FPL Apt?

Selecting the Next Airport page menu option
allows you to display the next waypoint in the
flight plan and activates it for editing.

To select the next FPL airport from the Airport
Location Page:

1. Press

MENU

to display the Airport Location

Page Options.

2. Turn the

small

large right

knob to high-

light “Select Next FPL Apt? and then press

ENT

Select Destination Apt?

Selecting the Destination Airport page menu option
allows you to display the Destination waypoint in
the flight plan.

To select the Destination airport from the Airport
Approach Page:

1. Press

MENU

to display the Airport Approach

Page Options.

2. Turn the

small

large right

knob to high-

light “Select Destination Apt? and then press

ENT

Содержание GNS 400W





























































































































































































































Результаты поиска

Содержание GNS 400W

Отзывы:

Похожие инструкции для GNS 400W

Бренды по названию

Популярные бренды

Garmin GNS 400W, Руководство и справочник пилота

Результаты поиска

Содержание GNS 400W

Отзывы:

Похожие инструкции для GNS 400W

Бренды по названию

Популярные бренды