manualshive.com logo in svg

Garmin GNC 420, Руководство и справочник пилота

На нашем сайте вы можете бесплатно скачать руководство по эксплуатации Garmin GNC 420. Инструкции по использованию доступны для скачивания на manualshive.com. Получите подробное описание продукта и настройки, чтобы использовать его по максимуму.

Поделиться
Скачать
background image

GNC 420(A) Pilot’s Guide and Reference

vi

WARRANTY

AVIATION LIMITED WARRANTY

All Garmin avionics products are warranted to be free from defects in materials or workmanship for: two years from the date of 
purchase for new Remote-Mount and Panel-Mount products; one year from the date of purchase for new portable products and any 
purchased newly-overhauled products; six months for newly-overhauled products exchanged through a Garmin Authorized Service 
Center; and 90 days for factory repaired or newly-overhauled products exchanged at Garmin in lieu of repair. Within the applicable 
period, Garmin will, at its sole option, repair or replace any components that fail in normal use. Such repairs or replacement will be 
made at no charge to the customer for parts or labor, provided that the customer shall be responsible for any transportation cost. 
This warranty does not apply to: (i) cosmetic damage, such as scratches, nicks and dents; (ii) consumable parts, such as batteries, 
unless product damage has occurred due to a defect in materials or workmanship; (iii) damage caused by accident, abuse, misuse, 
water, flood, fire, or other acts of nature or external causes; (iv) damage caused by service performed by anyone who is not an 
authorized service provider of Garmin; or (v) damage to a product that has been modified or altered without the written permission of 
Garmin.  In addition, Garmin reserves the right to refuse warranty claims against products or services that are obtained and/or used 
in contravention of the laws of any country.
THE WARRANTIES AND  REMEDIES  CONTAINED  HEREIN ARE  EXCLUSIVE AND  IN  LIEU  OF ALL  OTHER WARRANTIES, WHETHER 
EXPRESS, IMPLIED OR STATUTORY, INCLUDING ANY LIABILITY ARISING UNDER ANY WARRANTY OF MERCHANTABILITY OR FITNESS 
FOR A PARTICULAR PURPOSE, STATUTORY OR OTHERWISE. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, WHICH MAY VARY 
FROM STATE TO STATE.

IN NO EVENT SHALL GARMIN BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES, WHETHER 
RESULTING FROM THE USE, MISUSE OR INABILITY TO USE THE PRODUCT OR FROM DEFECTS IN THE PRODUCT. SOME STATES DO 
NOT ALLOW THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO 
YOU.

Garmin retains the exclusive right to repair or replace (with a new or newly-overhauled replacement product) the product or software 
or offer a full refund of the purchase price at its sole discretion. SUCH REMEDY SHALL BE YOUR SOLE AND EXCLUSIVE REMEDY FOR 
ANY BREACH OF WARRANTY.

Online Auction Purchases:

 Products purchased through online auctions are not eligible for warranty coverage. Online auction 

confirmations are not accepted for warranty verification. To obtain warranty service, an original or copy of the sales receipt from the 
original retailer is required. Garmin will not replace missing components from any package purchased through an online auction.

International Purchases:

  A separate warranty may be provided by international distributors for devices purchased outside the 

United States depending on the country. If applicable, this warranty is provided by the local in-country distributor and this distributor 
provides local service for your device. Distributor warranties are only valid in the area of intended distribution. Devices purchased in 
the United States or Canada must be returned to the Garmin service center in the United Kingdom, the United States, Canada, or 
Taiwan for service. 

To obtain warranty service, contact your local Garmin Authorized Service Center.  For assistance in locating a Service Center near you, 
visit the Garmin Website at ‘http://www.garmin.com’ or contact Garmin Customer Service at 800-800-1020.

190-00140-20  Rev. K

Содержание GNC 420



































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для GNC 420

trig TMA45 Operating Manual preview
TMA45
Бренд: trig Страницы: 24
Alto-Shaam HN-72 Operation And Care Manual preview
HN-72
Бренд: Alto-Shaam Страницы: 29
Faro Stealth Audio Link User Manual preview
Stealth Audio Link
Бренд: Faro Страницы: 16
3M C4667PW User Manual preview
C4667PW
Бренд: 3M Страницы: 727
EVEREST REFRIGERATION ESC47L Owner'S Manual preview
ESC47L
Бренд: EVEREST REFRIGERATION Страницы: 17
Poly-Tex PX7030 Assembly Instructions Manual preview
PX7030
Бренд: Poly-Tex Страницы: 11
Golze Engineering ADL170 User Manual preview
ADL170
Бренд: Golze Engineering Страницы: 19

Бренды по названию

Популярные бренды

Загрузить еще бренды