Service Bulletin 2048
Page 10-10
April 24, 2020
Revision B
14. Touch
SD Load
to load transponder config to the SD card.
Figure 15. SD Load
15. Cycle Power to the unit.
16. Go to config mode.
17. Make sure config mode fault is cleared and transponder config settings are correct.
RETURN TO SERVICE TEST PROCEDURE
Successful completion of Part Three of this bulletin is adequate to return the GPS 175/GNX 375/GNC 355
installation to service.
MATERIAL INFORMATION
•
The GPS 175/GNX 375/GNC 355 Software Loader Image
•
GPS 175/GNX 375/GNC 355 SW Data Card (010-02089-04)
Use the instructions in section 7.2.1 of GPS 175 TSO Installation Manual (190-02207-00), GNX 375 TSO
Installation manual (190-02207-04), or GNC 355 TSO Installation Manual (190-02488-00) to make a
loader card.
Printed pilots guides can be ordered through Garmin Order Administration (contact your account
rep for current pricing) or downloaded for at no charge from
SD
®
is a registered trademark of SD-3D, LLC. All rights reserved.
