Garmin GFC 600 Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 78

Garmin GFC 600 Скачать руководство пользователя страница 31

Garmin GFC 600 Pilot’s Guide

190-01488-00 Rev. B

23

AFCS

NOTE:

After disengaging the autopilot it cannot be re-engaged until a trim

failure condition is corrected.

OVERSPEED PROTECTION

NOTE:

Overspeed protection is not active in Altitude Hold (ALT), Glideslope

(GS), Glidepath (GP), or Go Around (GA) modes.

While Pitch Hold, Vertical Speed, Indicated Airspeed, or Selected Altitude Capture

mode is active, airspeed is monitored by the Flight Director. Overspeed protection is
provided in situations where the Flight Director cannot acquire and maintain the mode
reference for the selected vertical mode without exceeding the certified maximum
autopilot airspeed.

When an overspeed condition occurs, the Flight Director will deviate from the active

vertical reference and produce a pitch up command to slow the aircraft. Engine power
should be reduced and/or the

NOSE UP/DN

wheel moved in the UP direction to adjust

the PIT or VS reference.

When Overspeed Protection becomes active, the GMC 605 displays a MAXSPEED

message, the active vertical mode annunciation changes automatically to IAS, and the
previously active vertical mode becomes armed. The GI 285 displays IAS in green and
the previously active mode changes to white.

When the overspeed condition is resolved the MAXSPEED message is removed and

the armed vertical mode becomes active again.

NOTE:

When the autopilot is outside normal operating limits, it uses more

aggressive commands to return to normal limits.

GMC 605 Overspeed Indication

«
...
29
30
31
32
33
...
»

Содержание GFC 600















































































Отзывы:

Нет отзывов