Garmin GFC 600, Руководство пользователя

Страница: 34 / 46

GFC 600 Autopilot Installed in Piper PA-46-310P/350P 190-02011-11 Rev. 2
Page 34 of 46
BC
1. Navigation Source. ...........................................................................................SELECT CDI to VHF Nav
Tune and Identify a LOC BC station frequency
2. CDI …………….................................................................................SET / VERIFY localizer front course
If HSI is installed:
3. Intercept Heading .....................................................ESTABLISH in HDG or ROL mode (if required)
If DG is installed (no HSI installed):
3. Final Approach Course ............................ALIGN aircraft on final approach course using HDG mode
3a. HDG Bug (on DG) …….……….………………….…….………………..…… SET localizer front course
4. GMC 605 BC Key .........................................................................................................................PRESS
5.
Bold or subdued font BC annunciation ....................................................................VERIFY on GMC 605
6. Vertical Mode and Reference……………………….………………………...………. SELECT on GMC 605
7. Airspeed .........................................................................MAINTAIN 90 KIAS or greater (recommended)
NOTE
If the Course Deviation Indicator (CDI) is greater than half scale deflection, the autopilot
will arm the BC mode. The pilot must ensure that the current heading will result in a
capture of the selected course. If the CDI is within half scale deflection, the autopilot will
enter the capture mode when the BC key is pressed.
In aircraft with a DG installed and no HSI, BC mode cannot be armed. HDG mode must
be used to align the aircraft on the approach course with less than half scale deflection
prior to pressing the BC key.
DISABLING ESP
(ESP OFF message displayed in Message Window on GMC 605 display)
ESP can be disabled with the following procedure. ESP will be re-enabled when either the AP or FD keys
are pressed. The GMC 605 Mode Control Panel will display the message “ESP OFF” when ESP is
disabled.
1. AP DISC / TRIM INT switch.....................................................................PRESS and HOLD 5 seconds