Garmin GDL 50, Руководство по установке

Страница: 22 / 41

190-02087-10 GDL 50(R)/51(R)/52(R) Installation Manual
Rev. 2 Page 3-1
3 INSTALLATION PROCEDURE
3.1 Unpacking Unit
Carefully unpack the equipment and make a visual inspection of the unit for evidence of damage incurred
during shipment. If the unit is damaged, notify the carrier and file a claim. To justify a claim, save the
original shipping container and all packing materials. Do not return the unit to Garmin until the carrier has
authorized the claim.
Retain the original shipping containers for storage. If the original containers are not available, a separate
cardboard container should be prepared which is large enough to accommodate sufficient packing material
to prevent movement.
3.2 Wiring Harness Installation
Allow adequate space for installation of cables and connectors. The installer shall supply and fabricate all
cables. All electrical connections to the GDL 5XR are made through one 15-pin D-subminiature connector.
Section 4 defines the electrical characteristics of all input and output signals. Required connectors and
associated hardware are supplied with the connector kit.
See Appendix B for examples of interconnect wiring diagrams. Construct the actual harnesses in
accordance with the aircraft manufacturer authorized interconnect standards.
CAUTION
Check wiring connections for errors before installing the GDL 5XR. Incorrect wiring
could cause internal component damage.
Table 3-1. Pin Contact Part Numbers
Manufacturer [1]
15-pin D-Subminiature
20-24 AWG
Garmin P/N 336-00022-02
Military P/N M39029/63-368
[1] Non-Garmin part numbers shown are not maintained by Garmin and consequently are subject to
change without notice
Table 3-2 Recommended Crimp Tools
Manufacturer [1]
Hand
Crimping Tool
20-24 AWG
Positioner
Insertion/
Extraction Tool
Military P/N M22520/2-01 M22520/2-08 M81969/1-04
Daniels Daniels AFM8 K13-1 M81969/1-04
[1] Non-Garmin part numbers shown are not maintained by Garmin and consequently are subject to
change without notice.