Garmin GC 14 Скачать руководство пользователя страница 4

Image on the Chartplotter Screen Flickers

• Verify the camera points away from the sun.
• Adjust the contrast on your chartplotter. See your chartplotter manual for instructions.

Camera is Not Working and the Surface is Hot

• Verify the camera is connected to an appropriate power source.

Video Image Includes Scrolling Bars on the Chartplotter Screen

• Verify all cables are firmly connected.
• Install a composite video ground loop isolator (not included) between the camera and any chartplotter that 

does not have an isolated power ground.

Specifications

Dimensions (W x H)

54.3 x 50.7 mm (2.15 x 2.0 in.)

Weight

190 g (6.7 oz)

Operating temperature

From -20 to 60°C (from -4 to 140°F)

Storage temperature

From -20 to 60°C (from -4 to 140°F)

Water rating

IEC 60529 IPX7

1

Input voltage

From 9 to 18 Vdc

Current draw

IR off: 90 mA @ 12 Vdc
IR on: 183 mA @ 12 Vdc

Compass-safe distance

254 mm (10.0 in.)

Viewing angle

Vertical : 52 degrees
Horizontal : 95 degrees

IR distance

15 m (49 ft.)

Video output

1.0Vp-p composite 75 Ω composite

Resolution

PAL

Effective pixels

Vertical: 582
Horizontal: 976

© 2021 Garmin Ltd. or its subsidiaries
Garmin

®

, the Garmin logo, and GPSMAP

®

 are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. GC

 is a trademark of Garmin Ltd. 

or its subsidiaries. These trademarks may not be used without the express permission of Garmin.
Axis

®

 is a registered trademark of Axis AB.

M/N: B0P0776

The device withstands incidental exposure to water of up to 1 m for up to 30 min. For more information, go to 

www.garmin.com/waterrating

.

© 2021 Garmin Ltd. or its subsidiaries

support.garmin.com

Содержание GC 14

Страница 1: ...sed to extreme temperatures not exposed to gas or oil not exposed to radioactivity not facing into direct sunlight or a direct reflection of sunlight Tools Needed 1 A fuse or circuit breaker Drill and 2 mm 3 32 in drill bit Mounting the Camera 1 Secure the template to the mounting location 2 Using a 2 mm 3 32 in drill bit drill the pilot holes 3 Adjust the dome base to the correct orientation for ...

Страница 2: ...have a CVBS IN port you must use an encoder You can add up to four cameras to one encoder and up to two encoders to the Garmin Marine Network NOTE To reduce the possibility of interference you can install a composite video ground loop isolator not included between the camera and any chartplotters that do not have isolated power grounds Installation Diagram GC 14 1 A fuse or circuit breaker not inc...

Страница 3: ...ncluded Troubleshooting Video Does Not Appear on the Chartplotter Screen Verify all cables are firmly connected Verify the video cable is connected to the camera video output port Image on the Chartplotter Screen is Dim or Dark Verify the lens is clean If necessary wipe the lens with a soft clean cloth If the camera is exposed to too much direct light change the camera position or location Adjust ...

Страница 4: ...o 60 C from 4 to 140 F Water rating IEC 60529 IPX71 Input voltage From 9 to 18 Vdc Current draw IR off 90 mA 12 Vdc IR on 183 mA 12 Vdc Compass safe distance 254 mm 10 0 in Viewing angle Vertical 52 degrees Horizontal 95 degrees IR distance 15 m 49 ft Video output 1 0Vp p composite 75 Ω composite Resolution PAL Effective pixels Vertical 582 Horizontal 976 2021 Garmin Ltd or its subsidiaries Garmin...

Отзывы: