Connection Diagram
Microphone connector
You can securely mount the microphone connector in an accessible location
(
Installing the Connector Mount, page 4
).
RCA connectors
You must connect these to the AUX IN connector on the stereo wiring harness.
If the stereo has more than one AUX IN connector, you must connect to the
AUX1 connector.
Compatible stereo
TELEMUTE
You must connect the bare wire from the microphone cable to the TELEMUTE
wire on the stereo wiring harness if you want the microphone to change the
source when activated(
Operating the Handheld Microphone, page 7
).
Negative (-) power
connection
For the best results, you should connect the negative (-) wire from the micro
phone to the same negative (-) terminal as the stereo.
Positive (+) ignition
power connection
You should connect the positive (+) wire from the handheld microphone to the
ignition wire from the stereo to avoid draining the battery.
You must route the combined positive (+) and ignition wires through a 3 A fuse
before connecting to the ignition or manual switch.
Ignition or manual
switch
The ignition or manual switch turns on the stereo and microphone.
Stereo power positive
connection
You should not connect the positive (+) wire from the microphone to the
constant power cable from the stereo to avoid draining the battery.
Power source
6
