
Enabling Group Synchronization
You must remove the stereo from an existing group before you can enable the GROUP SYNC setting. You
cannot update settings when a stereo is part of a group.
You must enable this setting on each stereo that you want to retain group settings after a power cycle.
1 Select
> SETTINGS.
2 Select the name of the stereo.
3 Select POWER OPTIONS > GROUP SYNC.
The stereo retains group settings after a power cycle.
4 Repeat for additional stereos as needed.
NOTE: You must enable GROUP SYNC on all networked stereos for synchronization to work properly.
General Settings
NOTE: When the stereo is in a group, you cannot change the settings on that stereo.
Select
> SETTINGS, and select the name of the stereo.
NOTE: When a check box is filled, the option is on. When the check box is clear, the option is off.
DEVICE NAME: Sets a name for this device.
TUNER REGION: Sets the region used by the FM and AM sources.
This setting is also needed to configure DAB and SiriusXM sources.
TELEMUTE: Sets the behavior of the stereo when it detects a signal on the TELEMUTE wire in the wiring
harness. This is commonly used to change to the Aux source when you hold the button on a Fusion handheld
microphone. You can also choose to either mute the audio or change to the Aux source when connected
to a hands-free mobile phone kit. See yourFusion handheld microphone or hands-free mobile phone kit
instructions for more information.
NOTE: This setting does not affect a phone connected to the stereo using Bluetooth technology.
POWER OPTIONS: Adjusts the power settings, such as the power-save mode.
SEARCHING: Enables Fusion Alpha Search Technology (FAST), which allows you to quickly search for tracks by
letter or number. You can select a number to enable the FAST menu if your music device contains more than
the selected number of items.
ZONE: Enables you to configure the speaker zones (
Speaker Zone Settings, page 25
).
SOURCE: Allows you to enable, disable, and name the sources on the stereo (
).
NETWORK: Enables you to configure the Fusion PartyBus network settings (
).
UPDATE: Updates the stereo or connected devices using the appropriate update file on a connected USB flash
drive (
).
NOTE: It is not necessary to use this menu if you are updating the software using the Fusion-Link app on a
mobile device instead of using an update file loaded onto a USB flash drive (
Updating the Software Using the
).
UPDATE > FACTORY RESET: Restores all settings to the factory default values.
ABOUT: Shows the software version information for the stereo.
Speaker Zone Settings
Disabling the Internal Amplifier
If you do not connect speakers directly to zones 1 and 2, you can disable the internal amplifier to reduce power
consumption.
1 Select
> SETTINGS.
2 Select the name of the stereo.
3 Select ZONE.
4 Select INTERNAL AMP ON to clear the check box.
General Settings
25
Содержание FUSION APOLLO MS-WB675
