Garmin FORCE KRAKEN, Руководство пользователя

Страница: 15 / 34

Foot Pedal
NOTE: The foot pedal is an optional accessory that is sold separately.
You can use the foot pedal to operate the trolling motor.
Momentary
propeller control
Hold to turn on the propeller at the set speed.
Release to turn off the propeller.
Speed wheel
Rotate the wheel away from you to increase the propeller speed or cruise control
speed.
Rotate the wheel toward you to decrease the propeller speed or cruise control speed.
NOTE: The speed wheel is inactive when anchor lock is on.
Steering pedal
Push the pedal with your toes to turn the motor clockwise.
Push the pedal with your heel to turn the motor counter-clockwise.
NOTE: When anchor lock or heading hold is on, or you are following a route, tilt the
pedal or press a button to resume manual control at the previous propeller speed.
Status LED Shows the status of the foot pedal ( Status Indicator, page 12 ).
Continuous
propeller control
Press to turn the propeller on and off ( Turning the Propeller On and Off, page 13 ).
Heading hold
Press to set and maintain the current heading ( Maintaining Your Heading, page 14 ).
Press to turn off heading hold, stop the propeller, and resume manual control.
TIP: You can disable this function by pressing the heading hold button 6 times in
quick succession.
Anchor lock
Press to turn on anchor lock. Anchor lock uses the trolling motor to hold your
position (
Holding Your Position, page 15 ).
Press to turn off anchor lock and return to the previous steering mode.
Foot Pedal 11