Garmin Fishfinder 340C, Руководство пользователя

Страница: 37 / 56

Fishfinder 340C Owner’s Manual 31
U
SING THE
F
ISHFINDER
340C > U
SING THE
M
AIN
M
ENU
To set an alarm:
1. Use the ROCKER to highlight a sub tab of the Alarms tab.
2. Highlight the field below the alarm name that you want to
set, and press ENTER .
3. Highlight a new setting, and press ENTER .
4. Highlight the next field to the right (if applicable), and press
ENTER . Then enter a setting, and press ENTER to finish.
Sonar Sub Tab
• Fish —sets an alarm to sound (and an icon to appear) when
the Fishfinder detects a fish of the specified size.
•
Shallow Water
and
Deep Water
—set alarms to sound when
you enter an area of specified depth that is too shallow or
too deep. The settings are Off (default) and a user-defined
number.
• Drift —sets an alarm to sound when you exceed a specified
drift depth range. For example, if the value is set to 5 feet
and the current depth is 20 feet when the alarm is enabled,
the alarm sounds if the Fishfinder detects a depth greater
than 25 feet or shallower than 15 feet.
•
Water Temp
—sets an alarm to sound when the transducer
reports a temperature either above, below, inside, or outside
the specified values.
System Sub Tab
• Battery —sets an alarm to sound when the battery is
reaching a critical state of discharge. The settings are
Off (default) and a user-defined number of volts remaining.
• Timer —allows you to control a timer. This can be useful
for tournament fishing. The settings are Count Dn (Down),
Count Up (Up), Stop , or Reset the timer.