Power/Backlight
—press and hold to turn the unit on or of
f. Press
and release to cycle through the backlight settings.
RANGE
—press to display the Range Menu and select a new
Range setting.
PA
GE
PAGE
—press to cycle through the main pages.
QUI
T
QUIT
—press to exit a current menu or confi
guration option, or to
cancel data entry
.
ENTER
ENTER
—press to select a highlighted item, initiate data, entry and
accept selected values.
ADJ
MENU
ADJ/MENU
—press and release to show the
Adjustment Menu.
Press and hold to open the Main Menu.
GAI
N
GAIN
—press to show the Gain Menu. Use the
Rocker
to change
the Gain setting.
PAUS
E
PAUSE
—press to pause a Sonar Page. Press and hold for two
seconds to enter Pointer mode on a Sonar Page.
DA
TA
CNFG
DA
TA/CNFG
—press to toggle the data fi
elds in the upper
-left of
the screen between basic and advanced confi
gurations. Press and
hold for two seconds to enter the
Advanced Data Setup Menu.
Rocker
—press to highlight a menu option, enter data, change
settings, and control the pointer movement.
ADJ
MENU
DA
TA
CNFG
Adjustment Menu
Main Menu
Keypad Usage
Data Configuration
Press
DA
TA/CNFG
to toggle between basic and advanced
configurations. Press and hold
DA
TA/CNFG
to show the
Advanced Data
Setup Menu.
To change a data fi
eld, highlight a fi
eld and press
ENTER.
From a Sonar Page or the Flasher Page, press and release
ADJ/MENU
to show the
Adjustment Menu.
The
Adjustment
Menu contains selections based on the current page.
To change a setting, use the
Rocker
to highlight a selection,
and press
ENTER
. Use the
Rocker
to make a change, and
then press
ENTER
to accept the change.
Adjustment setting
changes are retained when the unit is turned of
f.
ADJ
MENU
From any page, press and hold
ADJ/MENU
to show the Main
Menu.
The Main Menu contains unit setup items including
settings for the Graph, Sonar
, T
emp,
Alarms, System, Units,
and
Time.
To view a tab, use the
Rocker
to highlight the tab.
To change a
setting, use the
Rocker
to highlight a fi
eld and press
ENTER
.
Use the
Rocker
to make a selection, and press
ENTER
to
accept the change. Changes made in the Main Menu are kept in memory and do not change when the unit is turned of
f.
