Garmin FF 350 Plus, Руководство пользователя

Страница: 10 / 14

From a sonar screen, select MENU > Sonar Setup > Overlay
Numbers .
Device Voltage : Shows the voltage of the device.
Depth : Shows the transducer's present depth.
Water Temp. : Shows the present water temperature.
Device Configuration
FF 350 Plus Settings Menu Tree
• System
◦ Display
◦ Backlight
◦ Color Mode
◦ Configure Colors
◦ Beeper
◦ Off
◦ Alarms Only
◦ On (Selections and Alarms)
◦ Auto Power
◦ Language
◦ System Information
◦ Event Log
◦ Software Information
◦ Factory Settings
◦ Simulator
• My Vessel
◦ Keel Offset
◦ Temp. Offset
◦ Calibrate Water Speed
• Alarms
◦ System
◦ Device Voltage
◦ Sonar
◦ Shallow Water
◦ Deep Water
◦ Water Temp.
◦ Fish
◦ Off
◦
◦
◦
• Units
◦ System Units
System Settings
Select Settings > System .
Display : Adjusts the backlight brightness ( Adjusting the
Backlight , page 1 ) and color scheme ( Changing the Color
Mode , page 1 ).
Beeper : Turns on and off the tone that sounds for alarms and
selections ( Setting the Beeper , page 1 ).
Auto Power : Turns on the device automatically when power is
applied.
Language : Sets the on-screen language.
System Information : Provides information about the device and
the software version.
Simulator : Turns on the simulator.
System Information
Select Settings > Settings > System Information .
Event Log : Allows you to view a log of system events.
Software Information : Provides information about the device
and the software version.
Garmin Devices : Provides information about connected Garmin
devices.
Factory Settings : Restores the device to factory settings.
NOTE: This deletes any setting information you have
entered.
My Vessel Settings
NOTE: Some settings and options require additional hardware.
Select Settings > My Vessel .
Keel Offset : Offsets the surface reading for the depth of a keel,
making it possible to measure depth from the bottom of the
keel instead of from the transducer location ( Setting the Keel
Offset , page 6 ).
Temp. Offset : Compensates for the water temperature reading
from a temperature-capable transducer ( Setting the Water
Temperature Offset , page 7 ).
Calibrate Water Speed : Calibrates the speed-sensing
transducer or sensor ( Calibrating a Water Speed Device ,
page 7 ).
Transducer Type : Displays the type of transducer connected to
the device ( Selecting the Transducer Type , page 1 ).
Setting the Keel Offset
You can enter a keel offset to compensate the surface reading
for the depth of a keel, making it possible to measure water
depth or depth below the keel instead of depth below the
transducer. Enter a positive number to offset for a keel. You can
enter a negative number to compensate for a large vessel that
may draw several feet of water.
NOTE: A buffer of 2 to 3 feet from the bottom of the keel is
recommended to ensure a safe distance from the keel to the
bottom.
6 Device Configuration