40
Customizing Your Device
4
Select the activity settings.
5
Select
Auto Climb
>
Status
.
6
Select
Always
or
When Not Navigating
.
7
Select an option:
•
Select
Run Screen
to identify which data screen
appears while running.
•
Select
Climb Screen
to identify which data
screen appears while climbing.
•
Select
Invert Colors
to reverse the display colors
when changing modes.
•
Select
Vertical Speed
to set the rate of ascent
over time.
•
Select
Mode Switch
to set how quickly the
device changes modes.
NOTE:
The Current Screen option allows you to
automatically switch to the last screen you were
viewing before the auto climb transition occurred.
3D Speed and Distance
You can set 3D speed and distance to calculate your
speed or distance using both your elevation change
and your horizontal movement over ground. You
can use it during activities such as skiing, climbing,
navigating, hiking, running, or biking.
Turning On and Off the Lap Key
You can turn on the Lap Key setting to record a lap
or a rest during an activity using LAP. You can turn
off the Lap Key setting to avoid recording laps due to
accidental key presses during an activity.
1
Hold
MENU
.
2
Select
Activities & Apps
.
3
Select an activity.
4
Select the activity settings.
5
Select
Lap Key
.
The lap key status changes to On or Off based on
the current setting.
Using Auto Scroll
You can use the auto scroll feature to cycle through
all of the activity data screens automatically while the
timer is running.
1
Hold
MENU
.
2
Select
Activities & Apps
.
3
Select an activity.
NOTE:
This feature is not available for all activities.
4
Select the activity settings.
5
Select
Auto Scroll
.
6
Select a display speed.
Changing the GPS Setting
For more information about GPS, go to
1
Hold
MENU
.
2
Select
Activities & Apps
.
3
Select the activity to customize.
4
Select the activity settings.
5
Select
GPS
.
6
Select an option:
•
Select
Off
to disable GPS for the activity.
•
Select
GPS Only
to enable the GPS satellite
system.
•
Select
GPS + GLONASS
(Russian satellite
system) for more accurate position information
in situations with poor sky visibility.
•
Select
GPS + GALILEO
(European Union satellite
system) for more accurate position information
in situations with poor sky visibility.
•
Select
UltraTrac
to record track points and sensor
data less frequently (
NOTE:
Using GPS and another satellite together
can reduce battery life more quickly than using
GPS only (
GPS and Other Satellite Systems, page
GPS and Other Satellite Systems
The GPS + GLONASS or GPS + GALILEO options offer
increased performance in challenging environments
and faster position acquisition than using GPS only.
However, using GPS and another satellite system
together can reduce battery life more quickly than
using GPS only.
UltraTrac
The UltraTrac feature is a GPS setting that records
track points and sensor data less frequently. Enabling
the UltraTrac feature increases battery life but
decreases the quality of recorded activities. You
should use the UltraTrac feature for activities that
demand longer battery life and for which frequent
sensor data updates are less important.
Power Save Timeout Settings
The timeout settings affect how long your device stays
in training mode, for example, when you are waiting for
a race to start. Hold
MENU
, select
Activities & Apps
,
select an activity, and select the activity settings.
Select
Power Save Timeout
to adjust the timeout
settings for the activity.
Normal:
Sets the device to enter low-power watch
mode after 5 minutes of inactivity.
Extended:
Sets the device to enter low-power watch
mode after 25 minutes of inactivity. The extended
mode can result in shorter battery life between
charges.
Changing the Order of an Activity in the Apps
List
1
Hold
MENU
.
2
Select
Activities & Apps
.
3
Select an activity.
4
Select
Reorder
.
Содержание FENIX 6Z Pro Solar
Страница 1: ...FE NIX 6 SERIES Owner s Manual...
Страница 65: ...support Garmin com en SG September 2019 190 02558 2H Rev A...
