Garmin Fenix 3, Руководство пользователя, Страница: 7 / 28

2
Select Settings > Apps .
3
Select an activity.
NOTE: This feature is not available for all activities.
4
Select Metronome > Status > On .
5
Select an option:
• Select
Beats / Minute to enter a value based on the
cadence you want to maintain.
• Select Alert Frequency to customize the frequency of the
beats.
• Select Sounds to customize the metronome tone and
vibration.
6
If necessary, select Preview to listen to the metronome
feature before you run.
7 Hold DOWN to return to the clock.
8 Go for a run ( Going for a Run ).
The metronome starts automatically.
9 During your run, select UP or DOWN to view the metronome
screen.
10
If necessary, hold UP to change the metronome settings.
Biking
Going for a Ride
Before you go for a ride, you should charge the device
( Charging the Device ). Before you can use an ANT+ sensor for
your ride, you must pair the sensor with your device ( Pairing
ANT+ Sensors ).
1
Pair your ANT+ sensors, such as a heart rate monitor, speed
sensor, or cadence sensor (optional).
2
From the clock, select START .
3
Select Bike .
4 When using optional ANT+ sensors, wait while the device
connects to the sensors.
5
Go outside, and wait while the device locates satellites.
6
Select START to start the timer.
History is recorded only while the timer is running.
7
Start your activity.
8
Select UP or DOWN to view additional data pages (optional).
9
After you complete your activity, select STOP > Save .
Swimming
NOTICE
The device is intended for surface swimming. Scuba diving with
the device may damage the product and will void the warranty.
NOTE: The device cannot record heart rate data while
swimming.
Going for a Pool Swim
Before you go for a swim, you should charge the device
( Charging the Device ).
1
From the clock, select START .
2
Select Pool Swim .
3
Select your pool size, or enter a custom size.
4
Select START to start the timer.
History is recorded only while the timer is running.
5
Start your activity.
The device automatically records swim intervals and lengths.
6
Select UP or DOWN to view additional data pages (optional).
7 When resting, select LAP to pause the timer.
8 Select LAP to restart the timer.
9
After you complete your activity, select STOP > Save .
Swim Terminology
Length : One trip down the pool.
Interval : One or more consecutive lengths. A new interval starts
after a rest.
Stroke : A stroke is counted every time your arm wearing the
device completes a full cycle.
Swolf : Your swolf score is the sum of the time for one pool
length and the number of strokes for that length. For
example, 30 seconds plus 15 strokes equals a swolf score of
45. For open water swimming, swolf is calculated over 25
meters. Swolf is a measurement of swimming efficiency and,
like golf, a lower score is better.
Stroke Types
Stroke type identification is available only for pool swimming.
Your stroke type is identified at the end of a length. Stroke types
appear when you are viewing interval history. You can also
select stroke type as a custom data field ( Customizing the Data
Screens ).
Free Freestyle
Back Backstroke
Breast Breaststroke
Fly Butterfly
Mixed More than one stroke type in an interval
Drill Used with drill logging ( Training with the Drill Log )
Resting During Pool Swimming
The default rest screen displays two rest timers. It also displays
time and distance for the last completed interval.
NOTE: Swim data is not recorded during a rest.
1 During your swim activity, select LAP to start a rest.
The display reverses to white text on a black background,
and the rest screen appears.
2 During a rest, select UP or DOWN to view other data screens
(optional).
3
Select LAP , and continue swimming.
4
Repeat for additional rest intervals.
Training with the Drill Log
The drill log feature is available only for pool swimming. You can
use the drill log feature to manually record kick sets, one-arm
swimming, or any type of swimming that is not one of the four
major strokes. The drill time is recorded, and you must enter the
distance.
TIP: You can customize the data screens and data fields for
your pool swim activity ( Customizing the Data Screens ).
1
From the clock, select START .
2 Select Pool Swim .
3 During your pool swim activity, select UP or DOWN to view
the drill log screen.
4
Select LAP to start the drill timer.
5
After completing a drill interval, select LAP .
The drill timer stops, but the activity timer continues to record
the entire swim session.
6
Select a distance for the completed drill.
Distance increments are based on the pool size selected for
the activity profile.
7
Select an option:
• To start another drill interval, select
LAP .
• To start a swim interval, select UP or DOWN to return to
the swim training screens.
8
After you complete your activity, select STOP > Save .
Activities 3