Tristan Darwin Project
GPS Training - Garmin Etrex
4. MENU SCREEN
This is where you can edit or delete the stored data.
The options are as follows:
MARK
Use to mark a waypoint. You’ll probably use this
when you want to mark a point you want to go to -
if you’re already there its much easier just to press
and hold down the ENTER button.
Screen showing list of stored
waypoints
If you select a
waypoint
from
the list you get
this
screen
where you can
see details of the
waypoint
and
edit it.
WAYPOINTS
Here you will find all the stored waypoints listed in
alphabetical order. This unit will store up to 500
waypoints. Here you can view or delete them, or
edit their name, position or symbol. To put in the
position of a waypoint that you’ve determined from
a map or chart, use the UP/DOWN buttons to high-
light the position shown at the bottom of the screen
and press ENTER to change it (this sort of thing is
much easier to do on a computer). Note that while
it does show altitude this is not always accurate -
there is no altimeter built into this model.
