Garmin eTrex Vista Cx Скачать руководство пользователя страница 17

Страница: 17 / 112

Selecting Options and Entering Data

Use the

Rocker

to highlight, select, or choose an item

in a list or a ﬁeld on the screen.

To select and activate an option:

1. From any page, press the

Menu

key. An

Options Menu appears with a list of additional

options for that page.

2. Use the

Rocker

to move the highlight up,

down, right, or left on the menu to highlight the

option you want, and press

Enter

to select it.

To exit a menu or return to the previous

setting:

Press the

Quit

key. The

Quit

key moves

backward through your steps. Press the

Quit

key repeatedly to return to the starting page.

The Status Bar and Date and Time

The status bar and Date/Time Window appear below

the backlight adjustment slider when you press and

release the

Power

key.

• Power to the unit is provided by either batteries or

from an auxiliary source. Power status is shown

on the Main Menu and the Status Bar - Date

and Time Window. The Battery Power icon

(

) shows the remaining power as the battery

is depleted. The external power icon ( ) is

shown when the unit is powered from an external

source (PC/USB or 12 volt DC adapters).

• Satellite signal status is shown when searching for

or acquiring satellites (

), when a 2D ﬁx (

)

is attained, and when a 3D ﬁx (

) is attained.

• The Compass ( ) and Alarm ( ) icons

appear when these features are activated.

Status Bar - Date/Time Window

eTrex Vista Cx Owner’s Manual

ETTING

TARTED

SING

THE

ISTA

Содержание eTrex Vista Cx

















































































































Результаты поиска

Содержание eTrex Vista Cx

Отзывы:

Garmin eTrex Vista Cx, Руководство пользователя, Страница: 17 / 112

Результаты поиска

Содержание eTrex Vista Cx

Отзывы: