background image

Edge

®

 Remote Instructions

Device Overview

Lap key. Select to mark a new lap.

Action key. Select to start and stop the timer. Hold to turn on the 
backlight.

NOTE: 

This is the default functionality of the action key. The action 

key functions are programmable.
Page key. Select to scroll forward through the data pages. Hold to 
scroll through the data pages in reverse.
Status LED.

Status LED

LED Activity

Status

Flashing green

Searching for a paired device.

Alternating red and green Attempting to pair with a new device.
12 rapid green flashes

Successfully paired with a device.

Four rapid green flashes

Successfully sent a command to a device.

Four rapid red flashes

Failed to send a command to a device.

Pairing the Remote with Your Edge Device

The first time you connect the Edge remote to your Edge device, 

you must pair the remote with your device.

1

Bring the remote within 3 m (10 ft.) of the device.

NOTE: 

Stay 10 m (33 ft.) away from other ANT+

®

 sensors 

while pairing.

2

From the 

Sensors

 menu, select 

Add Sensor

 > 

Edge 

Remote

.

3

On the remote, hold two keys simultaneously until the status 

LED starts alternating green and red, and release the keys.
The remote searches for your device. When the remote pairs 

successfully, the status LED flashes green 12 times, and the 

remote name appears on the device.

4

Select the remote, and select 

Add

.

After the remote is paired, it connects to your device whenever 

the device is in range and turned on.

Customizing the Action Key

1

From the 

Sensors

 menu, select 

Edge Remote

 > 

Sensor 

Details

.

2

Select 

Single Press

 or 

Press and Hold

.

3

Select a function for the action key.
For example, you can set the action key to display the map or 

turn on the backlight.

Installing the Mountain Bike Mount

1

Select a secure location to mount the device where it does 

not interfere with the safe operation of your bike.

2

Place the rubber pad around the handlebar.

3

Use the hex key to remove the screw   from the handlebar 

connector  .

4

Place the handlebar connector around the rubber pad.

5

Replace and tighten the screw.

NOTE: 

You should check the tightness of the screw 

periodically.

Installing the Road Bike Mount

1

Select a secure location to mount the device where it does 

not interfere with the safe operation of your bike.

2

Place the rubber disk   on the back of the bike mount.
The rubber tabs align with the back of the bike mount so the 

mount stays in place.

3

Attach the bike mount securely using the two bands  .

Using the Mounts

Several mounts are available for your remote, either included 

with the product or as an optional accessory. The mounts allow 

you to attach the remote to your body, your bike, or other 

objects.
• Align two of the notches   with the sides of the mount, and 

press the remote into the mount until it clicks.

• Press gently on the release tab  , and lift the remote from 

the mount.

Replacing the Battery

Before you can replace the battery, you must have a small 

Phillips screwdriver, a small flat screwdriver, and a CR2032 

lithium coin-cell battery.

January 2019

190-01694-91_0E

Отзывы: