Garmin EDGE 530, Руководство пользователя

Страница: 20 / 30

• Select Segments to turn on your enabled segments
( Enabling Segments , page 4 ).
• Select Alerts to customize your training alerts ( Alerts ,
page 16 ).
• Select Auto Features > Auto Lap to set how laps are
triggered ( Marking Laps by Position , page 16 ).
• Select Auto Features > Auto Pause to change when the
activity timer automatically pauses ( Using Auto Pause ,
page 16 ).
• Select Auto Features > Auto Sleep to automatically enter
sleep mode after five minutes of inactivity ( Using Auto
Sleep , page 17 ).
• Select Auto Features > Auto Scroll to customize the
display of the training data screens when the activity timer
is running ( Using Auto Scroll , page 17 ).
• Select Timer Start Mode to customize how the device
detects the start of a ride and automatically starts the
activity timer ( Starting the Timer Automatically , page 17 ).
• Select Nutrition/Hydration ...
• Select Navigation > Map to customize the map settings
( Map Settings , page 8 ).
• Select Navigation > Routing to customize the routing
settings ( Route Settings , page 8 ).
• Select Navigation > Navigation Prompts to customize
the ...
• Select Navigation > Sharp Bend Warnings ...
• Select GPS Mode to turn off GPS ( Training Indoors ,
page 5 ) or change the satellite setting ( Changing the
Satellite Setting , page 16 ).
All changes are saved to the activity profile.
Customizing the Data Screens
1
Select Menu > Settings > Activity Profiles .
2
Select a profile.
3 Select Data Screens .
4 Select a data screen.
5
If necessary, enable the data screen.
6
Select the number of data fields to appear on the screen.
7
Select a data field to change it.
Changing the Satellite Setting
For increased performance in challenging environments and
faster GPS position location, you can enable GPS+GLONASS
or GPS+GALILEO. Using GPS and another satellite together
reduces battery life more quickly than using only GPS.
1
Select Menu > Settings > Activity Profiles .
2
Select a profile.
3
Select GPS Mode .
4 Select an option.
Alerts
You can use alerts to train toward specific time, distance,
calorie, heart rate, cadence, and power goals. Alert settings are
saved with your activity profile.
Setting Range Alerts
If you have an optional heart rate monitor, cadence sensor, or
power meter, you can set up range alerts. A range alert notifies
you when the device measurement is above or below a
specified range of values. For example, you can set the device
to alert you when your cadence is below 40 RPM and over
90 RPM. You can also use a training zone for the range alert
( Training Zones , page 6 ).
1 Select Menu > Settings > Activity Profiles .
2
Select a profile.
3
Select Alerts .
4
Select Heart Rate Alert , Cadence Alert , or Power Alert .
5
Select the minimum and maximum values, or select zones.
6
If necessary, select .
Each time you exceed or drop below the specified range, a
message appears. The device also beeps if audible tones are
turned on ( Turning the Device Tones On and Off , page 17 ).
Setting a Recurring Alert
A recurring alert notifies you each time the device records a
specified value or interval. For example, you can set the device
to alert you every 30 minutes.
1
Select Menu > Settings > Activity Profiles .
2
Select a profile.
3
Select Alerts .
4
Select an alert type.
5
Turn on the alert.
6
Enter a value.
7 Select .
Each time you reach the alert value, a message appears. The
device also beeps if audible tones are turned on ( Turning the
Device Tones On and Off , page 17 ).
Auto Lap
Marking Laps by Position
You can use the Auto Lap feature to mark the lap at a specific
position automatically. This feature is helpful for comparing your
performance over different parts of a ride (for example, a long
climb or training sprints). During courses, you can use the By
Position option to trigger laps at all of the lap positions saved in
the course.
1 Select Menu > Settings > Activity Profiles .
2
Select a profile.
3
Select Auto Features > Auto Lap > Auto Lap Trigger > By
Position > Lap At .
4
Select an option:
• Select
Lap Press Only to trigger the lap counter each
time you select and each time you pass any of those
locations again.
• Select Start and Lap to trigger the lap counter at the GPS
location where you select and at any location during
the ride where you select .
• Select Mark and Lap to trigger the lap counter at a
specific GPS location marked before the ride and at any
location during the ride where you select .
5
If necessary, customize the lap data fields ( Customizing the
Data Screens , page 16 ).
Marking Laps by Distance
You can use the Auto Lap feature to mark the lap at a specific
distance automatically. This feature is helpful for comparing your
performance over different parts of a ride (for example, every 10
miles or 40 kilometers).
1
Select Menu > Settings > Activity Profiles .
2
Select a profile.
3
Select Auto Features > Auto Lap > Auto Lap Trigger > By
Distance > Lap At .
4 Enter a value.
5
If necessary, customize the lap data fields ( Customizing the
Data Screens , page 16 ).
Using Auto Pause
You can use the Auto Pause feature to pause the timer
automatically when you stop moving or when your speed drops
below a specified value. This feature is helpful if your ride
16 Customizing Your Device