Garmin ECHOMAP Ultra 122sv, Руководство пользователя

Страница: 27 / 52

have adjusted the level of detail shown on the screen using the
gain or brightness settings.
If you want to highlight smaller fish targets or create a higher
intensity display of a target, you can increase the color gain or
contrast setting. This causes a loss in the differentiation of the
high intensity returns at the bottom. If you want to reduce the
intensity of the return, you can reduce the color gain or contrast.
1
From a sonar view, select Menu .
2
Select an option:
• While in the Garmin ClearVü or SideVü sonar view, select
Contrast .
• While in a Panoptix LiveVü sonar view, select Color Gain .
• While in another sonar view, select Sonar Setup >
Appearance > Color Gain .
3
Select an option:
• To increase or decrease the color intensity manually,
select Up or Down .
• To use the default setting, select Default .
Sonar Recordings
Recording the Sonar Display
1
Insert a memory card into the card slot.
2 From a sonar view, select Menu > Sonar Setup > Sonar
Recording > Record Sonar .
15 minutes of sonar recording uses approximately 200 MB of
space of the inserted memory card. An individual recording
automatically ends after it reaches 4 GB in size. You can
record sonar data until the card reaches capacity.
Stopping the Sonar Recording
Before you can stop recording sonar, you must begin recording
it ( Recording the Sonar Display , page 21 ).
From a sonar view, select Menu > Sonar Setup > Sonar
Recording > Stop Recording .
Deleting a Sonar Recording
1 Insert a memory card into the card slot.
2 From a sonar view, select Menu > Sonar Setup > Sonar
Recordings > View Recordings .
3
Select a recording.
4
Select Review > Delete .
Playing Sonar Recordings
Before you can play back the sonar recordings, you must
download and install the HomePort ™ application and record
sonar data onto a memory card.
1
Remove the memory card from the device.
2 Insert the memory card into a card reader attached to a
computer.
3
Open the HomePort application.
4
Select a sonar recording from your device list.
5
Right-click the sonar recording in the lower pane.
6
Select Playback .
Traditional, Garmin ClearVü, and SideVü
Sonar Setup
NOTE: Not all options and settings apply to all models, sounder
modules, and transducers.
From a sonar view, select
Menu > Sonar Setup .
Depth Line : Shows a quick-reference depth line.
Scroll Speed : Sets the rate at which the sonar scrolls from right
to left.
In shallow water you might want to slow the scroll speed to
extend the length of time the information is displayed on
screen. In deeper water you can increase the scroll speed.
On-screen Control : Sets the behavior of the buttons on the
sonar screen control. This is available for touchscreen
devices.
Range Lines : Shows the vertical lines indicating the distance to
the right and left of the boat. This setting is available for
SideVü sonar view.
Color Scheme : Sets the color scheme of the sonar view. This
setting might be available in the Appearance menu.
The high contrast color schemes provide darker color
assignments to the low intensity returns. The low contrast
color schemes provide color assignments to the low intensity
returns that are similar to the background color.
Appearance : See Sonar Appearance Settings , page 22 .
Overlay Numbers : Sets the data shown on the sonar screen.
Advanced : See Advanced Sonar Settings , page 22 .
Installation : Restores the default sonar settings.
Setting the Zoom Level on the Sonar Screen
1
From a sonar view, select Menu > Zoom .
2
Select an option:
• To set the depth and zoom automatically, select
Auto .
TIP: You can select for more options.
• To set the depth range of the magnified area manually,
select Manual > , select View Up or View Down to set
the depth range of the magnified area, and select Zoom
In or Zoom Out to increase or decrease the magnification
of the magnified area.
• To magnify one particular area of the screen, select
Magnify .
TIP: You can drag the magnification box to a new location
on the screen.
• To zoom in on the sonar data from the bottom depth,
select Bottom Lock .
To cancel the zoom, deselect the option.
Setting the Scroll Speed
You can set the rate at which the sonar image moves across the
screen. A higher scroll speed shows more detail until there is no
additional detail to show, at which point it starts stretching out
the existing detail. This can be useful while moving or trolling, or
when you are in very deep water where the sonar is pinging very
slowly. A lower scroll speed displays sonar information on the
screen longer.
For most situations, the Default setting provides a good balance
between a quickly scrolling image and less distorted targets.
1
From a sonar view, select Menu > Sonar Setup > Scroll
Speed .
2
Select an option:
• To adjust the scroll speed automatically using speed-over-
ground or water speed data, select Auto .
The Auto setting selects a scroll rate to match the boat
speed, so targets in the water are drawn with the correct
aspect ratio and appear less distorted. When viewing
Garmin ClearVü or SideVü sonar views or searching for
structure, it is recommend to use the Auto setting.
• To scroll faster, select Up .
• To scroll more slowly, select Down .
Adjusting the Range of the Depth or Width Scale
You can adjust the range of the depth scale traditional and
Garmin ClearVü sonar views and the range of the width scale
for the SideVü sonar view.
Sonar Fishfinder 21