Garmin ECHOMAP UHD2 5 Series Скачать руководство пользователя страница 71 | Manualshive

Страница: 71 / 76

background image

Loading the New Software on a Memory Card Using Garmin Express

You can copy the software update to a memory card using a computer with the Garmin Express app.
This device supports up to a 32 GB microSD memory card, formatted to FAT32 with speed class 4 or higher.
Use of an 8 GB or larger memory card with speed class 10 is recommended.
Downloading the software update may take from a few minutes up to a few hours.
You should use a blank memory card for software updates. The update process erases the content on the card
and reformats the card.
1 Insert a memory card into the card slot on the computer.
2 Install the Garmin Express app (

Installing the Garmin Express App on a Computer, page 63

).

3 Select your vessel and device.
4 Select Software Updates > Continue.
5 Read and agree to the terms.
6 Select the drive for the memory card.
7 Review the reformat warning, and select Continue.
8 Wait while the software update is copied to the memory card.

NOTE: Copying the update file onto the card may take from a few minutes up to a few hours.

9 Close the Garmin Express app.
10 Eject the memory card from the computer.
After loading the update onto the memory card, install the software on the chartplotter (

Updating the Device

Software Using a Memory Card, page 65

).

Updating the Device Software Using a Memory Card

To update the software using a memory card, you must obtain a software-update memory card or load the
latest software onto a memory card using the Garmin Express app (

Loading the New Software on a Memory

Card Using Garmin Express, page 65

).

1 Turn on the chartplotter.
2 After the home screen appears, insert the memory card into the card slot.

NOTE: In order for the software update instructions to appear, the device must be fully booted before the
card is inserted.

3 Select Install Now > Update Software > Yes.
4 Wait several minutes while the software update process completes.
5 When prompted, leave the memory card in place, and restart the chartplotter.
6 Remove the memory card.

NOTE: If the memory card is removed before the device restarts fully, the software update is not complete.

Cleaning the Screen

NOTICE

Cleaners containing ammonia will harm the anti-reflective coating.

The device is coated with a special anti-reflective coating which is very sensitive to waxes and abrasive
cleaners.
1 Apply an eyeglass lens cleaner specified as safe for anti-reflective coatings to the cloth.
2 Gently wipe the screen with a soft, clean, lint-free cloth.

Appendix

65

«
...
69
70
71
72
73
...
»

Содержание ECHOMAP UHD2 5 Series













































































Отзывы:

Нет отзывов

Похожие инструкции для ECHOMAP UHD2 5 Series

Бренд: Queclink Страницы: 17

Бренд: NAL RESEARCH CORPORATION Страницы: 3

Бренд: Camoplast Страницы: 23

Бренд: Raytheon Страницы: 93

Бренд: RoyalTek Страницы: 31

Бренд: Gator Страницы: 24

Бренд: u-blox Страницы: 54

Бренд: GoPass Страницы: 2

Бренд: GoPass Страницы: 2

Бренд: Teledyne Страницы: 131

Бренд: Enfora Страницы: 53

Бренд: Initial Страницы: 1

Бренд: Initial Страницы: 1

Бренд: RoyalDigital Страницы: 9

Бренд: Ercogener Страницы: 71

Бренд: Technoton Страницы: 12

Бренд: My Smart Object Страницы: 10

Бренд: Seeworld Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды