Garmin ECHOMAP UHD2 5 Series Скачать руководство пользователя страница 70 | Manualshive

Страница: 70 / 76

background image

Updating Your Charts Using the Garmin Express App

This device supports up to a 32 GB microSD memory card, formatted to FAT32 with speed class 4 or higher.
Use of an 8 GB or larger memory card with speed class 10 is recommended.
Downloading the chart update may take up to a few hours.
You should use a blank memory card for chart updates. The update process erases the content on the card and
reformats the card.
1 Install the Garmin Express app on your computer (

Installing the Garmin Express App on a Computer, page 63

).

2 Open the Garmin Express app on your computer.
3 Select your vessel and device.
4 If chart updates are available, select Chart Updates > Continue.
5 Read and agree to the terms.
6 Insert your chartplotter chart memory card into the computer.
7 Select the drive for the memory card.
8 Review the reformat warning, and select OK.
9 Wait while the chart update is copied to the memory card.

NOTE: Copying the update file onto the card may take from a few minutes up to a few hours.

10 Close the Garmin Express app.
11 Eject the memory card from the computer.
12 Turn on the chartplotter.
13 After the home screen appears, insert the memory card into the card slot.

NOTE: In order for the update instructions to appear, the device must be fully booted before the card is
inserted.

14 Select Update Software > Yes.
15 Wait several minutes while the update process completes.
16 When prompted, leave the memory card in place, and restart the chartplotter.
17 Remove the memory card.

NOTE: If the memory card is removed before the device restarts fully, the update is not complete.

Software Updates

You may need to update the software when you install a new device or add an accessory.
You can use the ActiveCaptain mobile app to update the device software (

Updating Software with the

ActiveCaptain App, page 10

).

You can also use the Garmin Express desktop app to update your chartplotter software (

Loading the New

Software on a Memory Card Using Garmin Express, page 65

).

This device supports up to a 32 GB microSD memory card, formatted to FAT32 with speed class 4 or higher.
Use of an 8 GB or larger memory card with speed class 10 is recommended.
Before you update the software, you should check the software version installed on your device (

Viewing System

Software Information, page 54

). Then, you can go to

garmin.com/support/software/marine.html

, select See All

Devices in this Bundle, and compare the installed software version to the software version listed for your
product.
If the software version installed on your device is older than the version listed on the website, you should update
the software using the ActiveCaptain mobile app (

Updating Software with the ActiveCaptain App, page 10

) or the

Garmin Express desktop app (

Loading the New Software on a Memory Card Using Garmin Express, page 65

).

64

Appendix

«
...
68
69
70
71
72
...
»

Содержание ECHOMAP UHD2 5 Series













































































Отзывы:

Нет отзывов

Похожие инструкции для ECHOMAP UHD2 5 Series

Бренд: Raymarine Страницы: 54

Бренд: Raymarine Страницы: 54

Бренд: Audiovox Страницы: 91

Бренд: Magellan Страницы: 19

Бренд: I-gotU Страницы: 2

Бренд: CalAmp Страницы: 22

Бренд: Garmin Страницы: 48

Бренд: Teltonika Страницы: 17

Бренд: Parrot Страницы: 46

Бренд: Neoway Страницы: 41

Бренд: WhereSafe Страницы: 3

Бренд: SONASONIC Страницы: 10

Бренд: Lark Страницы: 62

Бренд: Lark Страницы: 109

PANASONIC GYRO RDR-3200

Бренд: RoyalTek Страницы: 25

Бренд: RoyalTek Страницы: 27

Бренд: RoyalTek Страницы: 48

Industrial Tracker

Бренд: Abeeway Страницы: 46

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды