• To navigate the route from the starting point used when
the route was created, to the right of the original route,
select
Forward – Starboard
.
• To navigate the route from the destination point used
when the route was created, to the left of the original
route, select
Backward – Port
.
• To navigate the route from the destination point used
when the route was created, to the right of the original
route, select
Backward – Starboard
.
6
If necessary, select
Done
.
A magenta line appears. In the center of the magenta line is
a thinner purple line that represents the corrected course
from your present location to the destination. The corrected
course is dynamic, and it moves with your boat when you are
off course.
7
Review the course indicated by the magenta line.
8
Follow the magenta line along each leg in the route, steering
to avoid land, shallow water, and other obstacles.
9
If you are off course, follow the purple line (corrected course)
to go to your destination, or steer back to the magenta line
(direct course).
Deleting a Saved Route
1
Select
Nav Info
>
Routes
.
2
Select a route.
3
Select
Delete
.
Deleting All Saved Routes
Select
Nav Info
>
Clear User Data
>
Routes
.
Tracks
A track is a recording of the path of your boat. The track
currently being recorded is called the active track, and it can be
saved. You can show tracks in each chart or 3D chart view.
Showing Tracks
From any chart or a 3D chart view, select
Menu
>
Waypoints & Tracks
>
Tracks
>
On
.
A trailing line on the chart indicates your track.
Setting the Color of the Active Track
1
Select
Nav Info
>
Tracks
>
Active Track Options
>
Track
Color
.
2
Select a track color.
Saving the Active Track
The track currently being recorded is called the active track.
1
Select
Nav Info
>
Tracks
>
Save Active Track
.
2
Select an option:
• Select the time the active track began.
• Select
Entire Log
.
3
Select
Save
.
Viewing a List of Saved Tracks
Select
Nav Info
>
Tracks
>
Saved Tracks
.
Editing a Saved Track
1
Select
Nav Info
>
Tracks
>
Saved Tracks
.
2
Select a track.
3
Select
Edit Track
.
4
Select an option:
• Select
Name
, and enter the new name.
• Select
Track Color
, and select a color.
Saving a Track as a Route
1
Select
Nav Info
>
Tracks
>
Saved Tracks
.
2
Select a track.
3
Select
Edit Track
>
Save Route
.
Browsing for and Navigating a Recorded Track
Before you can browse a list of tracks and navigate to them, you
must record and save at least one track (
1
Select
Nav Info
>
Tracks
.
2
Select a track.
3
Select
Follow Track
.
4
Select an option:
• To navigate the track from the starting point used when
the track was created, select
Forward
.
• To navigate the track from the destination point used
when the track was created, select
Backward
.
5
Review the course indicated by the colored line.
6
Follow the line along each leg in the route, steering to avoid
land, shallow water, and other obstacles.
Deleting a Saved Track
1
Select
Nav Info
>
Tracks
>
Saved Tracks
.
2
Select a track.
3
Select
Delete
.
Deleting All Saved Tracks
Select
Nav Info
>
Manage Data
>
Clear User Data
>
Saved
Tracks
.
Retracing the Active Track
The track currently being recorded is called the active track.
1
Select
Nav Info
>
Tracks
>
Follow Active Track
.
2
Select an option:
• Select the time the active track began.
• Select
Entire Log
.
3
Review the course indicated by the colored line.
4
Follow the colored line, steering to avoid land, shallow water,
and other obstacles.
Clearing the Active Track
Select
Nav Info
>
Tracks
>
Clear Active Track
.
The track memory is cleared, and the active track continues
to be recorded.
Managing the Track Log Memory During Recording
1
Select
Nav Info
>
Tracks
>
Active Track Options
.
2
Select
Record Mode
.
3
Select an option:
• To record a track log until the track memory is full, select
Fill
.
• To continuously record a track log, replacing the oldest
track data with new data, select
Wrap
.
Configuring the Recording Interval of the Track Log
You can indicate the frequency at which the track plot is
recorded. Recording more frequent plots is more accurate but
fills the track log faster. The resolution interval is recommended
for the most efficient use of memory.
1
Select
Nav Info
>
Tracks
>
Active Track Options
>
Record
Interval
>
Interval
.
2
Select an option:
• To record the track based on a distance between points,
select
Distance
>
Change
, and enter the distance.
• To record the track based on a time interval, select
Time
>
Change
, and enter the time interval.
10
Navigation with a Chartplotter
