Garmin DriveAssist 50, Руководство пользователя

Страница: 8 / 30

Speed limit exceeded : The device plays a tone and displays a
red border on the speed limit icon when you exceed the
posted speed limit for the current road.
Wrong way on a one-way street : The device plays a message
and displays a full-screen warning if you travel the wrong way
on a one-way street. The edges of the screen appear red and
an alert remains at the top of the screen until you leave the
one-way street or correct your direction of travel.
Railroad crossing : The device plays a tone and displays the
distance to an upcoming railroad crossing.
Animal crossing : The device plays a tone and displays the
distance to an upcoming animal crossing area.
Curve : The device plays a tone and displays the distance to a
curve in the road.
Slower traffic : The device plays a tone and displays the
distance to slower traffic when you approach slower traffic at
a higher speed. Your device must be receiving traffic
information to use this feature ( Receiving Traffic Data Using
a Traffic Receiver , page 13 ).
Fatigue warning : The device plays a tone and suggests
upcoming rest stops after you have been driving for more
than two hours without stopping.
Forward collision warning : The device alerts you when it
detects that you are not maintaining a safe distance between
your vehicle and the vehicle in front of you ( Forward Collision
Warning System , page 4 ).
Lane departure warning : The device alerts you when it detects
you may be crossing a lane boundary unintentionally ( Lane
Departure Warning System , page 4 ).
Go alert : The device plays a tone and displays an alert when
stopped traffic starts moving.
Enabling or Disabling Audible Driver Alerts
You can turn off individual audible driver alerts. The visual alert
appears even when the audible alert is disabled.
1
Select Settings > Map & Vehicle > Audible Driver Alerts .
2
Select or clear the check box next to each alert.
Red Light and Speed Cameras
NOTICE
Garmin is not responsible for the accuracy of or the
consequences of using a red light or speed camera database.
NOTE: This feature is not available for all regions or product
models.
Information about red light and speed camera locations is
available in some areas for some product models. Go to
garmin.com/speedcameras to check availability and
compatibility, or to purchase a subscription or one-time update.
You can purchase a new region or extend an existing
subscription at any time.
You can go to
mygarmin.com to update the camera database on
your device. You should update your device frequently to
receive the most up-to-date camera information.
For some devices and regions, basic red light or speed camera
data may be included with your device. Included data does not
include updates or a subscription.
Advanced Driving Assistance System
Your device includes an advanced driving assistance system
(ADAS), which uses the integrated dash camera to provide
warnings and alerts about your driving environment.
Enabling or Disabling Advanced Driving Assistance
Features
You can enable or disable advanced driving assistance features
in the camera settings ( Camera Settings , page 18 ).
1
Select Settings > Camera .
2
Select or clear the check box next to each warning or alert.
Go Alert
The Go alert plays a tone and displays an alert when stopped
traffic starts moving. This alert appears only after the vehicle
ahead has moved a substantial distance and your vehicle has
remained stopped. This can be useful at stop lights or in traffic
delays. This feature uses the dash camera to detect the stopped
or moving vehicle and requires a clear view of the road.
Forward Collision Warning System
WARNING
The forward collision warning system (FCWS) feature is for
information only and does not replace your responsibility to
observe all road and driving conditions, abide by all traffic
regulations, and use safe driving judgment at all times. The
FCWS relies on the camera to provide a warning of upcoming
vehicles and, as a result, may have limited functionality in low
visibility conditions.
NOTE: This feature is not available in all areas or for all product
models.
The FCWS feature alerts you when the device detects that you
are not maintaining a safe distance between your vehicle and
the vehicle in front of you. The device determines your vehicle
speed using GPS, and it calculates an estimated safe following
distance based on your speed. The FCWS activates
automatically when your vehicle speed exceeds 48 km/hr
(30 mph).
When the device detects that you are too close to the vehicle
ahead of you, the device plays an audible alert, and a warning
appears on the screen.
Forward Collision Warning System Performance Tips
Several factors affect the performance of the forward collision
warning system (FCWS). Some conditions may prevent the
FCWS feature from detecting a vehicle ahead of you.
• The FCWS feature activates only when your vehicle speed
exceeds 48 km/h (30 mph).
• The FCWS feature may not detect a vehicle ahead of you
when the camera's view of the vehicle is obscured by rain,
fog, snow, sun or headlight glare, or darkness.
• The FCWS feature may not function properly if the camera is
incorrectly aligned ( Aligning the Camera , page 3 ).
• The FCWS feature may not detect vehicles greater than 40 m
(130 ft.) away or closer than 5 m (16 ft.).
Lane Departure Warning System
WARNING
The lane departure warning system (LDWS) feature is for
information only and does not replace your responsibility to
observe all road and driving conditions, abide by all traffic
regulations, and use safe driving judgment at all times. The
LDWS relies on the camera to provide warnings for lane
4 Driver Awareness Features and Alerts