2
Select
Touch to Add
3
Select a road.
4
Select a traffic camera location.
A preview of the live image from the camera appears next to
a map of the camera's location. You can select the image
preview to view the full-sized image.
5
Select
Save
to save the camera (optional).
A thumbnail image preview of the camera is added to the
main screen of the photoLive app.
Viewing photoLive Traffic Cameras on the Map
The photoLive map tool shows traffic cameras from the road
ahead of you.
1
From the map, select >
photoLive
.
The device shows the live image from the nearest traffic
camera on the road ahead, along with the distance to the
camera. When you pass the camera, the device loads the
live image of the next camera on the road.
2
If no cameras are found for the road, select
Find Cameras
to
view or save nearby traffic cameras (optional).
Saving a Traffic Camera
1
Select >
photoLive
.
2
Select
Touch to Add
.
3
Select a road.
4
Select an intersection.
5
Select
Save
.
Vehicle and Driver Tools
Break Planning
NOTICE
This device by itself is NOT an approved substitute for logbook
recording requirements under Federal Motor Carrier Safety
Administration (FMCSA) regulations. Drivers should comply with
all applicable federal and state hours-of-service requirements.
When integrated with a Garmin eLog compliant Electronic
Logging Device (ELD), this device enables a motor carrier to
comply with hours of service logging and break requirements.
For more information, or to purchase a Garmin eLog device, go
When the break planning feature is enabled, the device notifies
you one hour before suggested break times and drive hour limits
and suggests break locations on your route. You can use this
feature to keep track of your working hours, which may help you
comply with safety regulations.
NOTE:
Break planning features are not available when using the
car vehicle profile.
Taking a Suggested Break
When it is time for a break, the device notifies you and displays
suggested break location POIs along your route.
Select a POI from the list of suggested break locations.
The device adds the break location as the next destination on
your route.
Starting the Break Timer
The break timer starts automatically when the vehicle is moving
at least 8 kph (5 mph) for 30 seconds. You can start the timer
manually at any time.
1
From the map, select >
Break Planner
.
2
Select
Start Timer
.
Pausing and Resetting the Break Timer
The break timer pauses automatically when the vehicle stops for
three minutes or longer. You can pause the timer manually for
brief stops, such as parking or stopping at a truck stop. At the
end of your drive, you can manually reset the timer.
1
Select
Stop Timer
.
2
Select an option:
• To pause the timer, select
Pause
.
• To stop and reset the timer, select
Reset
.
Adjusting Drive Hours
You can adjust your total hours driven to more closely match
your hours of service records.
1
While using the break planner feature, select
Total Hours
Driven
.
2
Enter the total hours driven.
3
Select
Save
.
Adjusting the Daily Driving Limit
You can adjust the daily driving limit to correspond with legal
requirements in your area.
NOTE:
This feature is not available in all areas.
1
While using the break planner feature, select
Daily
Hours Driven
.
2
Select the daily driving limit for your area.
3
Select
Save
.
Dispatch and Track
NOTICE
Use caution when sharing your location information with others.
The Dispatch and Track feature lets you share your trip with a
dispatcher or contacts from your smartphone and social
networking accounts. While you are sharing, viewers can track
your current location, your next destination, and the path of your
recent travels in real time.
This feature requires a smartphone running the Smartphone
Link app.
NOTE:
This feature is not available when using the car vehicle
profile.
Setting Up Dispatch and Track Sharing
The first time you use the Dispatch and Track feature, you must
set up the feature and invite a dispatcher.
1
Connect to Smartphone Link.
2
On your dēzl
™
device, select >
Dispatch and Track
.
3
Follow the on-screen instructions on your dēzl device to finish
setting up the feature.
Starting a Dispatch and Track Session
NOTICE
Use caution when sharing your location information with others.
Before you can start sharing, you must set up the Dispatch and
Track feature (
Setting Up Dispatch and Track Sharing
).
You can start sharing your Dispatch and Track data using your
dēzlCam device or the Smartphone Link app.
• On your dēzlCam device, select >
Dispatch and Track
>
Start
.
• From the map on your dēzlCam device, select >
Dispatch
and Track
>
Start
.
• On your smartphone, open the Smartphone Link app, and
select
Dispatch and Track
>
Start Dispatch and Track
.
A link to view your Dispatch and Track data is posted to your
enabled social network accounts, and an email with the link is
Vehicle and Driver Tools
17
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
