Garmin DESCENT T1, Руководство пользователя

Страница: 10 / 12

Troubleshooting
Updating the Transmitter Software Using
Your Descent Dive Computer
Before you can update the software, you must pair your Descent
T1 transmitter to a compatible Descent dive computer.
1
Select an option to sync your dive computer:
• Sync your dive computer with the Garmin Dive
™ app.
• Connect the dive computer to your computer using the
USB cable, and sync with the Garmin Express
™
application.
Garmin Dive and Garmin Express automatically look for
software updates. When you sync with Garmin Express, the
update is applied immediately to your dive computer. When
you sync with Garmin Dive, you will be prompted to apply the
update at a later time.
2
Install the transmitter on the first-stage regulator ( Installing
the Transmitter on Your Tank Regulator , page 1 ).
3
Gradually open the tank valve to pressurize the first-stage
regulator.
When the transmitter detects pressure, it wakes from low
power mode and plays a tone.
4
On the paired Descent dive computer, hold MENU , select
Dive Setup > Air Integration > Transmitters , and select
your transmitter.
5
Wait for the transmitter to connect to your dive computer.
Connected appears on the dive computer screen.
6
Select Software Update .
NOTE: This option may take up to a minute to appear while
the dive computer determines the transmitter's software
version and battery status.
7
Verify the transmitter ID when prompted.
The transmitter ID is printed on the housing.
8
Keep the dive computer near the transmitter until the
software update is complete.
My transmitter and watch lose connection
underwater
If your watch and transmitter communicate on the surface but
lose communication underwater, you can try these tips.
• Increase the transmitter power setting (
Adjusting the
Transmitter Power Setting , page 6 ).
• Install the transmitter on a high pressure hose extension to
improve the line of sight between the transmitter and the
watch ( Installing the Transmitter on a High Pressure Hose
Extension , page 2 ).
• Follow the transmitter position tips to achieve the best line of
sight between the watch and the transmitter ( Transmitter
Position Tips , page 1 ).
Adjusting the Transmitter Power Setting
NOTE: Increasing the power setting increases the audible noise
from the transmitter and decreases its battery life.
1
Hold MENU .
2
Select Dive Setup > Air Integration > Transmitters .
3 Select a paired transmitter.
4 Select Set Transmit Power .
5
Enter the transmitter ID.
NOTE: The transmitter ID is printed on the housing.
6
Select an option.
My transmitter battery is draining rapidly
If your transmitter battery is draining faster than the expected
battery life ( Specifications , page 5 ), you should make sure the
transmitter is returning to low power mode after a dive.
When you return to the surface after a dive, depressurize
your regulator.
The installed transmitter enters low power mode after two
minutes have elapsed.
6 Troubleshooting