Garmin DESCENT 12, Руководство пользователя, Страница: 15 / 22

Viewing Transceiver Data During a Dive
1 During a dive, press DOWN on your paired Descent watch to view the data screen.
TIP: You can customize the dive data screens to view the transceiver and diver dashboard data on dedicated
data screens.
The gas consumption estimate for the selected transceivers.
NOTE: You can customize the transceivers used for gas calculations (
Including Transceivers in Gas
Consumption Calculations, page 10 ).
The air time remaining (ATR) estimate for the selected transceivers.
Your primary and secondary transceivers and their tank pressure values.
NOTE: You can customize which transceivers are displayed (
Selecting Transceivers to View During a
Dive, page 10 ).
2 Press START, and select Divers to view the tank pressure values and approximate depths of the paired
Descent transceivers in the network.
Updating the Transceiver Software Using Your Watch
Before you can update the software, you must pair your Descent T2 transceiver to a compatible Descent watch.
1 Select an option to sync your watch:
• Sync your watch with the Garmin Dive ™ app.
• Connect the watch to your computer using the USB cable, and sync with the Garmin Express
™
application.
The Garmin Dive app and Garmin Express application automatically look for software updates. When you
sync with the Garmin Dive app, you will be prompted to apply the update at a later time. When you sync with
the Garmin Express application, the update is applied immediately to your watch.
2 Wake the transceiver from low power mode ( Waking the Transceiver from Low Power Mode, page 8 ).
3 On the paired Descent watch, hold MENU, select Dive Setup > Dive Network & Air Integration > Transmitters,
and select your transceiver.
4 Wait for the transceiver to connect to your watch.
Connected appears on the watch screen.
5 Select Update Available, press START, and select Install Now.
NOTE: The Update Available option may take up to a minute to appear while the watch determines the
transceiver's software version and battery status. If the battery status is low or critically low, you must
replace the battery before you can install the update.
6 Keep the watch near the transceiver until the software update is complete.
Diving 11