Garmin DESCENT 12, Руководство пользователя, Страница: 14 / 22

Selecting Transceivers to View During a Dive
You can view two paired transceivers at-a-glance on the primary dive data screen. You can customize which
paired transceivers appear on the screen. By default, the first and second transceivers that you pair appear
(
Viewing Transceiver Data During a Dive, page 11 ).
1 On the paired Descent watch, hold MENU.
2 Select Dive Setup > Dive Network & Air Integration > Display Setup.
3 Select a field to customize.
4 Select a paired transceiver.
Selecting the Gas Consumption Rate Metric
1 On the paired Descent watch, hold MENU.
2 Select Dive Setup > Dive Network & Air Integration > Display Setup > Gas Consumption Rate.
3 Select an option.
NOTE: The watch can estimate volumetric surface air consumption (SAC) or respiratory minute volume
(RMV) only if the air volume of the tank is entered in the watch (
Transceiver Settings, page 9 ). The watch can
estimate pressure-based surface air consumption (PSAC) with or without the air volume of the tank.
Including Transceivers in Gas Consumption Calculations
Gas consumption and air time remaining estimates are calculated using the tank pressure from the included
transceivers. By default, the first transceiver that you pair with your compatible dive computer is included. You
can include additional paired transceivers in gas consumption calculations.
1 On the paired Descent watch, hold MENU.
2 Select Dive Setup > Dive Network & Air Integration > Transmitters.
3 Select a paired transceiver.
4 Select the SAC/RMV/ATR toggle switch to include the transceiver in gas consumption calculations.
5 If necessary, repeat steps 2 through 4 to include additional paired transceivers in gas consumption
calculations.
10 Diving