Garmin D2 MACH1, Руководство пользователя

Страница: 54 / 86

Symbol Set: Sets the chart symbols in marine mode.
The NOAA option displays the National Oceanic
and Atmospheric Administration chart symbols.
The International option displays the International
Association of Lighthouse Authorities chart symbols.
Showing and Hiding Map Data
If you have multiple maps installed on your device, you
can choose the map data to show on the map.
1 From the watch face, press START.
2 Select Map.
3 Hold MENU.
4 Select the map settings.
5 Select Map > Configure Maps.
6 Select a map to activate the toggle switch, which
shows or hides the map data.
Music
NOTE: There are three different music playback options
for your D2 Mach 1 watch.
• Third-party provider music
• Personal audio content
• Music stored on your phone
On a D2 Mach 1 watch, you can download audio content
to your watch from your computer or from a third-party
provider, so you can listen when your phone is not nearby.
To listen to audio content stored on your watch, you can
connect Bluetooth headphones.
Connecting to a Third-Party Provider
Before you can download music or other audio files to
your watch from a supported third-party provider, you
must connect the provider to your watch.
Some third-party music provider options are already
installed on your watch.
For more options, you can download the Connect IQ
app on your phone (
Downloading Connect IQ Features,
page 50 ).
1 From the controls menu on the watch, select .
2 Select the music provider.
NOTE: If you want to select another provider, hold
MENU, select Music Providers, and follow the on-
screen instructions.
Downloading Audio Content from a Third-Party Provider
Before you can download audio content from a third-party
provider, you must connect to a Wi‑Fi network (
Connecting
to a Wi‑Fi Network, page 48 ).
1 Open the music controls.
2 Hold MENU.
3 Select Music Providers.
4 Select a connected provider.
5 Select a playlist or other item to download to the
watch.
6 If necessary, press BACK until you are prompted to
sync with the service.
NOTE: Downloading audio content can drain the battery.
You may be required to connect the watch to an external
power source if the battery is low.
Downloading Personal Audio Content
Before you can send your personal music to your watch,
you must install the Garmin Express
™ application on your
computer ( garmin.com/express ).
You can load your personal audio files, such as .mp3
and .m4a files, to a D2 Mach 1 watch from your computer.
For more information, go to
garmin.com/musicfiles .
1 Connect the watch to your computer using the included
USB cable.
2 On your computer, open the Garmin Express
application, select your watch, and select Music.
TIP: For Windows
® computers, you can select and
browse to the folder with your audio files. For Apple ®
computers, the Garmin Express application uses your
iTunes
® library.
3 In the My Music or iTunes Library list, select an audio
file category, such as songs or playlists.
4 Select the checkboxes for the audio files, and select
Send to Device.
5 If necessary, in the D2 Mach 1 list, select a category,
select the checkboxes, and select Remove From
Device to remove audio files.
Listening to Music
1 Open the music controls.
2 If necessary, connect your Bluetooth headphones
( Connecting Bluetooth Headphones, page 47 ).
3 Hold MENU.
4 Select Music Providers, and select an option:
• To listen to music downloaded to the watch from
your computer, select My Music ( Downloading
Personal Audio Content, page 46 ).
• To control music playback on your phone, select
Control Phone.
• To listen to music from a third-party provider, select
the name of the provider, and select a playlist.
5 Select .
Music Playback Controls
NOTE: Music playback controls may look different,
depending on the selected music source.
Select to view more music playback controls.
Select to browse the audio files and playlists for
the selected source.
46 Music