Customizing Navigation Data Screens
1 Hold MENU.
2 Select Navigation > Data Screens.
3 Select an option:
• Select Map > Status to turn on or off the map.
• Select Map > Data Field to turn on or off a data field
that shows routing information on the map.
• Select Up Ahead to turn on or off information about
upcoming course points.
• Select Guide to turn on or off the guide screen that
displays the compass bearing or course to follow
while navigating.
• Select Elevation Plot to turn on or off the elevation
plot.
• Select a screen to add, remove, or customize.
Setting Up a Heading Bug
You can set up a heading indicator to display on your data
pages while navigating. The indicator points to your target
heading.
1 Hold MENU.
2 Select Navigation > Heading Bug.
Setting Navigation Alerts
You can set alerts to help you navigate to your
destination.
1 Hold MENU.
2 Select Navigation > Alerts.
3 Select an option:
• To set an alert for a specified distance from your
final destination, select Final Distance.
• To set an alert for the estimated time remaining until
you reach your final destination, select Final ETE.
• To set an alert when you stray from the course,
select Off Course.
• To enable turn-by-turn navigation prompts, select
Turn Prompts.
4 If necessary, select Status to turn on the alert.
5 If necessary, enter a distance or time value, and select
.
Power Manager Settings
Hold MENU, and select Power Manager.
Battery Saver: Allows you to customize system settings
to extend battery life in watch mode (
Battery Saver Feature, page 75
).
Power Modes: Allows you to customize system settings,
activity settings, and GPS settings to extend battery
life during an activity (
).
Battery Percentage: Displays remaining battery life as a
percentage.
Battery Estimates: Displays remaining battery life as an
estimated number of days or hours.
Customizing the Battery Saver Feature
The battery saver feature allows you to quickly adjust
system settings to extend battery life in watch mode.
You can turn on the battery saver feature from the
controls menu (
).
1 Hold MENU.
2 Select Power Manager > Battery Saver.
3 Select Status to turn on the battery saver feature.
4 Select Edit, and select an option:
• Select Watch Face to enable a low-power watch
face that updates once per minute.
• Select Music to disable listening to music from your
watch.
• Select Phone to disconnect your paired phone.
• Select Wi-Fi to disconnect from a Wi‑Fi network.
• Select Wrist Heart Rate to turn off the wrist heart
rate monitor.
• Select Pulse Oximeter to turn off the pulse oximeter
sensor.
• Select Always On Display to turn off the screen
when not in use.
• Select Brightness to reduce the screen brightness.
The watch displays the hours of battery life gained with
each setting change.
5 Select Low Battery Alert to receive an alert when the
battery power is low.
Changing the Power Mode
You can change the power mode to extend battery life
during an activity.
1 During an activity, hold MENU.
2 Select Power Mode.
3 Select an option.
The watch displays the hours of battery life available
with the selected power mode.
Customizing Power Modes
Your device comes preloaded with several power modes,
allowing you to quickly adjust system settings, activity
settings, and GPS settings to extend battery life during
an activity. You can customize existing power modes and
create new custom power modes.
1 Hold MENU.
2 Select Power Manager > Power Modes.
3 Select an option:
• Select a power mode to customize.
• Select Add New to create a custom power mode.
4 If necessary, enter a custom name.
Power Manager Settings
75
Содержание D2 MACH 1 STANDARD
Страница 1: ...D2 MACH1STANDARD PRO Owner sManual...
Страница 102: ...support garmin com October 2023 190 02855 00_0H...
