manualshive.com logo in svg

Garmin Cessna Caravan G1000, Руководство пользователя, Страница: 364 / 724

Поделиться
Скачать
Garmin Cessna Caravan G1000 Скачать руководство пользователя страница 364

Garmin G1000 Pilot’s Guide for the Socata TBM 850/900

190-00709-05  Rev. D

350

HAZARD AVOIDANCE

3) 

To view the text of the SIGMET or AIRMET, press the 

RANGE

 Knob and move the Map Pointer over the icon.

4) 

Press the 

ENT

 key.  The figure below shows a sample of SIGMET text.

To display the SIGMET and AIRMET legend, select the 

LEGEND 

Softkey when SIGMETs and AIRMETs are 

selected for display.

 

Sample SIGMET Text

SIGMET/AIRMET Legend

Figure 6-23  SIGMET/AIRMET Text and Legend

METARS AND TAFS

 NOTE:  

Atmospheric pressure reported for METARs is given in hectopascals (hPa), except in the United 

States, where it is reported in inches of mercury (in Hg).  Temperatures are reported in Celsius.

  NOTE:  

METAR information is only displayed within the installed navigation database service area.

METARs (METeorological Aerodrome Reports) typically contain information about the temperature, 

dewpoint, wind, precipitation, cloud cover, cloud heights, visibility, and barometric pressure at an airport or 
observation station. They can also contain information on precipitation amounts, lightning, and other critical 
data.  METARs reflect hourly observations; non-routine updates include the code “SPECI” in the report.   
METARs are shown as colored flags at airports that provide them.

Содержание Cessna Caravan G1000





















































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов