Garmin G1000 Cockpit Reference Guide for the Mooney M20M & M20R
5-4
SECTION 5 – AUDIO PANEL
5.6 DIGITAL CLEARANCE RECORDER
WITH PLAYBACK CAPABILITY
Each reception of primary active COM audio is auto-
matically recorded in a memory block. When the next
transmission is received, it is recorded in the next memory
block, and so on. Once the 2.5 minutes of recording time
has been reached, the recorder begins recording over the
stored memory blocks, starting from the oldest block.
Powering off the unit automatically clears all recorded
blocks.
Figure 5-8 Playback
• Pressing
PLAY
once plays back the latest recorded
memory block, then returns to normal operation.
• Pressing
PLAY
during playback of a memory block
halts the playback of this block and plays back the
preceding recorded block. The
PLAY
key can be
used to backtrack through the recorded memory
blocks to reach and play back any desired block.
Pressing the
MKR/MUTE
key during playback
halts playback and returns the recorder/playback
to normal operation.
If a COM input signal is detected during playback,
playback is halted and the new COM input signal is re-
corded as the latest block.
