Item
Wire Color
Wire Function
À
Red
Power
Á
Black
Power
Â
Yellow
Serial data input
Ã
Blue
Serial data output
Ä
Green
Serial ground wire
Å
Audio jack
3
Insulate and secure unconnected wires.
Installing the Device in the Mount
NOTICE
Before you place the device in the mount, ensure that the metal
contacts on the device and the mount are dry. Moisture on the
contacts causes equipment damage. Use the weather cap to
keep the mount cradle dry.
1
Place the weather cap
À
in the storage area on the mount.
2
Place the bottom of your device into the cradle
Á
.
3
Tilt the device back until it snaps into place.
4
Using the security screw tool, tighten the security screw
Â
on
the top of the mount
Ã
.
Removing the Device from the Mount
1
Loosen the security screw.
2
Press the button
À
on the side of the mount to release the
device.
3
Lift the device out of the mount.
4
Place the weather cap
Á
on the cradle.
Installation Instructions
3
