Turning Off the Devices
• On the handheld device, hold the
power key until the LCD display turns
off.
Using the Touchscreen
• Select
to open the application
drawer.
• Select to open a menu.
• Select to close the page and return
to the previous page.
• If you are more than one menu from
the home screen, select and hold to
return to the home screen.
• Select to return to the previous
page.
• Select to save changes and close
the page.
• Select and to scroll.
• Select to search by name.
Locking the Touchscreen
You can lock the screen to prevent
inadvertent screen touches.
1
Select the Power key.
2
Select .
Acquiring Satellite Signals
Both the collar and handheld device must
acquire satellite signals before you put the
collar on your dog. Acquiring satellites can
take a few minutes.
1
Go outdoors to an open area.
2
Turn on both devices (page 3).
3
Select the power key on the handheld
device.
shows the GPS signal strength.
When the collar has acquired satellite
signals, the status LED flashes a double-
blink or triple-blink in green.
Dog Collar Device Setup
Methods to Add a Dog Collar Device to
a Handheld Device
If you purchased the dog collar device and
the handheld device separately, you must
add the dog collar device to the handheld
device. You can add up to 20 dog collar
devices to one handheld device.
Using MURS/VHF: Allows you to add a
dog collar device after you have
placed the dog collar device into
pairing mode by pressing the power
key.
4
Quick Start Manual
