Garmin Apollo GX50, Руководство пользователя

Страница: 148 / 336

3. Press
ENTER
to continue the active flight plan.
Waypoint sequencing will be enabled.
*Active* 259nm
Dest: Wpt: PDT
Active ·
Load Approach (GX50/60 Only)
This option is available for the Active flight plan
when a datacard with approach information is
inserted into the GX50/60. Press
ENTER
to show the
available approaches for the destination airport. Press
SEL
while in the Nav or Map functions to go directly
to this option.
*Active* 56.1nm
Dest Wpt: PDX
Load Approach?
Change Approach (GX50/60 Only)
This option is available on the Flight Plan home page
when an approach is already loaded. Press
ENTER
to
select a new approach for the current destination
airport.
*Active* 56.1nm
Dest Wpt: PDX
Change Approach?
Unload Approach (GX50/60 Only)
This option is available on the Flight Plan home page
when an approach is already loaded. Press
ENTER
to
unload the approach from the active flight plan. The
approach
waypoints will be replaced by the
destination waypoint.
*Active* 56.1nm
Dest Wpt: PDX
Unload Approach?
6-22
Flight Plan Functions
ENTER