DRAFT
nüvi 705 Series Owner’s Manual
Appendix
Appendix
Ways to Charge Your
nüvi
Use the vehicle power cable.
Use the USB cable.
Use an optional AC adapter cable.
Calibrating the Screen
If the touch screen is not responding
properly, calibrate the touch screen.
1. Turn the nüvi off.
2. Hold your finger in the middle of the
screen.
3. Slide the power button to the left then
immediately to the right. Continue
to hold your finger on the screen for
about one minute until the calibration
screen appears.
4. Follow the on-screen instructions.
•
•
•
Resetting the nüvi
If the nüvi screen stops functioning, turn
the nüvi off and on again. If this does not
help, slide the
Power
key to the left and
hold for 8 seconds. Turn the nüvi back
on. The nüvi should operate normally.
Locking Your nüvi
Garmin Lock
™
is a theft-deterrent system
that locks your nüvi. Each time you turn
on the nüvi, enter the PIN or drive to the
security location.
1. Touch
Tools
>
Settings
>
Security
.
2. Touch the button below
Garmin
Lock
.
3. Enter a 4-digit PIN and drive to a
security location.
What is a Security Location?
Select a location you return to often,
such as your home, for your security
location. If the nüvi has satellite signals
