0
Tracking System Owner’s Manual - Draft
M
aIn
p
aGeS
>
Using the Route Page Options
The Route Page shows all points stored in memory for
the route selected on the Routes Page. Press
MENU
to open the Route Page Options Menu.
• Remove All
—removes all waypoints from the
saved route.
• Route
—reverses the order of the route points in
the saved route.
•
Profile
—creates a vertical profile of the route
when MapSource U.S. Topo 24k map data is used.
• Copy Route
—makes a copy of the saved route
with the same name followed by a number.
• Delete Route
—deletes the saved route.
• Change Data Fields
—select different values
for the two data fields at the bottom of the page.
• Restore Defaults
—restore route settings to the
factory default setting
M
aIn
P
aGeS
The Tracking System has six main pages: Satellite
Page, Trip Computer Page, Map Page, Compass Page,
Altimeter Page, and the Main Menu. You can cycle
through these pages by pressing the
PAGE
key to
move forward or pressing the
QUIT
key to reverse.
Add more pages using the Page Sequence option on
the Main Menu. The Active Route Page appears only
when you are actively navigating.
Each page has an Options Menu, which contains the
setup options and functions that apply to the page. To
view the Options Menu for a page, press the
MENU
key.
Satellite Page
The Satellite Page shows the receiver status, satellite
locations, satellite signal strength, and the receiver’s
current location when the unit receives signals from at
least three satellites.
Tracking System Owner's Manual F20 20
1/16/2007 1:51:44 PM
