background image

 

GMA 1347D Installation Manual 

 

Page v 

190-00303-21  

Revision 

LIST OF TABLES 

 
TABLE 

PAGE 

 
2-1  Pin and Crimp Tool Part Numbers.....................................................................................................2-3 

3-1  Pin Contact Part Numbers..................................................................................................................3-1 

3-2  Recommended Crimp Tools ..............................................................................................................3-2 

4-1  J3471 Pin Assignments......................................................................................................................4-2 

4-2  J3472 Pin Assignments......................................................................................................................4-4 

4-3  Aircraft Power Pin Assignments, J3472 ............................................................................................4-6 

4-4  Aircraft Lighting Pin Assignments, J3472.........................................................................................4-6 

4-5  RS-232 Pin Assignments, J3472........................................................................................................4-6 

4-6  Marker Beacon Pin Assignments, J3472 ...........................................................................................4-7 

4-7 Reversionary 

Mode 

Pin Assignments, J3472 ....................................................................................4-8 

4-8  Speaker Pin Assignments, J3472 .......................................................................................................4-8 

4-9  Digital Audio Pin Assignments, J3472..............................................................................................4-8 

4-10 PA MUTE Pin Assignments, J3472 ..................................................................................................4-8 

4-11 Mic Audio Inputs and Mic Key Pin Assignments, J3471..................................................................4-9 

4-12 Remote ICS Audio and ICS Keys Pin Assignments, J3471 ..............................................................4-9 

4-13 Com Audio and Mic Keys Pin Assignments, J3471........................................................................4-10 

4-14 Nav Audio Pin Assignments, J3471 ................................................................................................4-10 

4-15 Headset Outputs Pin Assignments, J3471 .......................................................................................4-11 

4-16 Music Inputs Pin Assignments, J3471 .............................................................................................4-11 

4-17 Unswitched Audio Inputs Pin Assignments, J3471.........................................................................4-11 

4-18 Telephone Inputs/Outputs Pin Assignments, J3471 ........................................................................4-11 

4-19 AUX, DME and ADF Audio Pin Assignments, J3471....................................................................4-12 

4-20 Failsafe Audio Pin Assignments, J3471 ..........................................................................................4-12 

4-21 Summed Audio Pin Assignments, J3471.........................................................................................4-12 

 

Содержание 011-01257-00
















































Отзывы: