- 10
into next program level mode ,the speed will change when the program level mode change, at the running state you can press
“SPEED+””SPEED-“ change speed, but this program level speed will recovered when into next program level mode. after finish
the program level mode, the system will sound “Bi-Bi-Bi” to remind, the machine speed down smoothly and stop working,
display ”END”.5 seconds later the machine into alert state.
1. PREPARATION BEFORE START
Ⅴ
.
OPERATION INSTRUCTION
1.1
Plug in the power cord and press the power key at the down front part of the machine. If the machine is not operated or
moved for a long time, please turn off the power.
1.2
Nip the safe key on the clothes and put the switch of magnet into the computer. If the safety magnet is not put into the
assigned location, then the machine will not work.
2. START
2.1
Press START/STOP, the machine begins to work with starting speed 0.8KM/h
2.2
Press SPEED can control the speed, with one press 0.1 KM/h will be increased or decreased. Press the key without stop can
get to the speed you want. The highest speed is 8KM/h while the lowest is 0.8 KM/h.
3. TWO WAYS TO STOP THE MACHINE
3.1
Pulling the safe key will put a quick stop to the machine which will beep. Before restart, please put the yellow magnet to
the original place.
3.2
Press START/STOP, the machine will stop working
IMPORTANT SAFETY INSTRUCTION
1. The machine is for home use
2. The voltage for the machine is 220V.
3. Before operating the machine, please do 10-minute warm-up and wear clothes and shoes that are suitable for sports
4. Do not stand on the motorized treadmill when you adjust, test or start the motorized treadmill.
5. Be careful when you get on or off the machine. Before starting the machine, please grab the handlebars and place your
feet on the side rails (not the running belt). After starting the machine, stand on the belt with the machine operating at
the lowest speed. Then increase the speed gradually. Before getting off the
Содержание TOORX STREET COMPACT
Страница 1: ...Ed Rev INSTRUCTION 06 19 GRLDTOORXTSTRCPT 02...
Страница 4: ...6 EXPLODED DRAWING...
