Image 17
WATT FUNCTION
：
The preset watt value 120 ( image 18 ), by turning “+” or “-” button to setting the WATT value
( setting range : 10~350 ). Finished setting, press the rotary button to set TIME ( image 19), if no need setting the Time
value, press “ START/STOP”, resistance value will adjust automatic according to the set target WATT value.During the
working time press “START/STOP” enter into break mode, then press button “RESET” it will leave this mode.
Image 18
Image 19
RECOVERY FUNCTION
：
A. If no pulse input, it’s invalid press “RECOVERY” button.
B. If detected pulse input, press this button to “RECOVERY” function mode, time count down from 00:60
to 00:00 ( image20 ). Screen will display your heart rate recovery status F1,F2….to F6 (image 21 ). F1 is the
best,
F6 is the worst. User may keep exercising to improve the heart rate recovery status.
C. In testing ,press the RECOVERY button to leave this test mode.
Image 20
Image 21
