User Guide
XtraTAP | P10GxxFE-X | 4.22.1
6. Aggregate Mode
In this mode, the network ports 1 and 2 and aggregate ports 3 and 4 are defined by the system. LFP
is supported on the network ports in this mode. The traffic ingressed port 1 is egressed out ports 3 and 4.
The traffic ingressed in port 2 is egressed out ports 3 and 4.
Figure 10 Aggregate Mode
Figure 11 Aggregate Mode (LFP)
If link is lost on one of the network ports. The TX will be disabled on the other network
port. The RX for both network ports remain on.
Garland Technology | 716.242.8500 | www.garlandtechnology.com
Copyright © 2023 Garland Technology, LLC. All rights reserved.
35