User Guide
EdgeSafe Bypass TAP | P10GxxBPE | 4.22.1
6. Breakout Mode
In this mode, the network ports 1 and 2 and breakout ports 3 and 4 are defined by the system. LFP
is supported on the network ports in this mode. The traffic ingressed in port 1 is egressed out port 3.
The traffic ingressed in port 2 is egressed out port 4.
Figure 10 Breakout Mode
Figure 11 Breakout Mode (LFP)
If link is lost on one of the network ports. The TX will be disabled on the other network
port. The RX for both network ports remain on.
Garland Technology | 716.242.8500 | www.garlandtechnology.com
Copyright © 2022 Garland Technology, LLC. All rights reserved.
34