Garland Moisture+ MPOE5L, Руководство по обслуживанию

Страница: 17 / 28

Document #MPOELSVC0504 Page 17
Tools:
Digital thermometer w/probe; oven mitt.
See also, Temperature Calibration on page 15.
1. Clamp the probe in the center of the middle rack.
· Pass the probe wire out of the oven between the
door and the door seal and close the door.
· Plug the probe wire into the thermometer.
2. Press the oven On/Off button.
3. Press the “Preheat 2 (Preheat Bakery 2)” button to
heat the oven to 350°F. Allow the oven to preheat
for approximately 30 minutes before calibrating.
Temperature Conversion & Resistance Equivalency
DEG.F DEG.C OHMS
20 -6.7 974.57
30 -1.1 995.77
40 4.4 1016.9
50 10 1038
60 15.6 1059.1
70 21.1 1080.2
80 26.7 1101.2
90 32.2 1122.1
100 37.8 1143.1
120 48.9 1184.8
140 60 1226.4
160 71.1 1267.9
180 82.2 1309.2
200 93.3 1350.4
220 104.1 1391.4
240 115.5 1432.2
260 126.6 1473
280 137.7 1513.5
300 148.8 1554
320 160 1594.2
340 171.1 1634.4
360 182.2 1674.3
380 193.3 1714.2
400 204.4 1753.8
420 215.5 1793.3
440 226.6 1832.7
460 237.7 1871.9
480 248.8 1911
500 260 1950
520 271.1 1988.7
540 282.2 2027.4
560 293.3 2065.9
575 310.6 2094.6
580 304.4 2104.2
600 315.5 2142.4
NOTE: W
hen checking resistance on the cavity probe,
disconnect the probe wires from the relay board,
terminals T9 & T10. The wires from the relay board
to the probe must be in series with the probe.
CALIBRATION