background image

Part # 4532288 Rev 3 (6/11/14) 

 

© 2013 Garland Commercial Ranges Limited 

         

 

 

 

 

Model: HO IN 1500 

 

                               

 

 

INSTALLATION AND 

OPERATION MANUAL 

GARLAND INDUCTION 

TEMPERATURE CONTROLLED 

BUILT-IN HOLD-LINE 

with RTCSmp TECHNOLOGY 

R

eal-time 

T

emperature 

C

ontrol 

S

ystem 

m

ulti-

p

oint sensing

 

 

PLEASE READ ALL SECTIONS OF THIS MANUAL AND 
RETAIN FOR FUTURE REFERENCE.

 

THIS PRODUCT HAS BEEN CERTIFIED AS 
COMMERCIAL COOKING EQUIPMENT AND MUST BE 
INSTALLED BY PROFESSIONAL PERSONNEL AS 
SPECIFIED 

INSTALLATION

 AND ELECTRICAL CONNECTION 

MUST COMPLY WITH CURRENT CODES: 
IN CANADA – THE CANADIAN ELECTRICAL CODE 
PART 1 AND  / OR LOCAL CODES. 
IN USA – THE NATIONAL ELECTRICAL CODE ANSI / 
NFPA – CURRENT EDITION. 

FOR YOUR SAFETY

 

DO NOT STORE OR USE GASOLINE OR OTHER 
FLAMMABLE VAPORS OR LIQUIDS IN THE VICINITY OF 
THIS OR ANY OTHER APPLIANCE

 

CE models

 comply with the latest European Norms: 

EN 60335-1, EN 60335-2-36, EN 62233 (EMC/EMV) 

North American models

: ETL listed in compliance 

with UL 197, CSA C22.2 No.109, NSF-4 
Complies with FCC part 18, ICES-001

 

WARNING

 

IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, 
SERVICE OR MAINTENANCE CAN CAUSE PROPERTY 
DAMAGE, INJURY, OR DEATH. READ THE INSTALLATION, 
OPERATING AND MAINTENANCE INSTRUCTIONS 
THOROUGHLY BEFORE INSTALLING OR SERVICING THIS 
EQUIPMENT

 

Users are cautioned that maintenance and repairs must be performed by a Garland authorized service agent using only genuine 
Garland replacement parts. Garland will have no obligation with respect to any product that has been improperly installed, 
adjusted, operated or not maintained in accordance with national and local codes and/or installation instructions provided with 
the product or any product that has its serial number defaced, obliterated or removed, and/or which has been modified or 
repaired using unauthorized parts or by unauthorized service agents. For a list of authorized service agents and/or genuine 
replacement parts, please visit our website at 

www.garland-group.com for USA and Canada.

 For international customers, please 

visit 

www.manitowocfoodservice.com.

 The information contained herein, including design and part specifications, may be 

superseded and is subject to change without notice. 

 

Visit our 

Video Gallery

 at  

www.Garland-Group.com

 

Содержание IN 1500





























Отзывы: