1.0
General remarks
1.1 Application
The following instructions contain information, which is fundamentally important and must be
taken into account during assembly, operation and maintenance. They must therefore be read
very carefully before installation and operation by the responsible specialist staff and the
operator(s). They must always be available for consultation at the place of operation.
General information about products – installation – initial operation – operating test – cooking
process – safety instructions – out of operation – fault finding – cleaning – support – are
described on the following pages.
1.2 Purpose of induction cookers
The Garland induction unit cookers are especially suitable as cookers in the kitchen and for the
preparation of meals on the table. A cooker can be used for cooking, warming up, keeping
warm, flambéing, roasting, etc.The cookers are to be used only with pans made of material
which is suitable for induction. There are specific manufacturers who sell special types of pots
and pans for induction cooking.
Do not use
induction cookers to heat up any other metallic objects other than pots and pans
provided for it.
NOTE: For Wok models, only use supplied wok pans or "Spring of Swizerland" wok pans. Other wok
pans may not have the same shape as the ceramic wok bowl, causing overheating and cracking of
the ceramic.
2.0
Description of products
We manufacture several basic types of induction cookers with various performances and
measurements. All are built to last; they are also compact and powerful with a revolutionary
technology in a complete case of stainless steel. All of our accessories are designed to
coordinate with the induction units and since each unit is equipped with continuous control, they
allow efficient cooking.
•
Simple operation with rotary switch
•
Compact powerful electronics enable flat construction and safe operation
•
A maximum of safety thanks to multiple safety functions
•
Short cooking time
•
Electronic checking
•
Compact measurement – light weight
•
Meets all current standards: VDE EN 60335-1/-2/36, CE-conforming
•
UL197; CAN/CSA/C22.2 No. 109, NSF 4-1996
