User Guide
PacketMAX |
GAA10G20AC | 4.23.1
4. Remove a port or load balancing group by selecting the Red X.
Egress Filter
1. Select the gray filter icon on the desired egress port.
Figure 7 Egress Filter
The Port XX Egress Filters panel will be displayed.
2. Add filters by placing the cursor on the desired filter template. A previously created filter
template or the new filter template option may be selected. Select with the left mouse button. Drag the
filter template to the Port XX Egress Filters panel and release. The filter template will become an
actual egress filter once the config map is saved.
Filters may be added in any combination. If multiple filters are added, then the top filter is the
highest priority. The filters are considered from top to bottom. A filter may be selected
and moved up or down depending on priority preference.
Figure 8 Port XX Egress Filters
Garland Technology | 716.242.8500 | www.garlandtechnology.com
Copyright © 2023 Garland Technology, LLC. All rights reserved.