USER GUIDE
EdgeSafe 40G Bypass Modular Network TAP | M40GBP
Version 1.6 Page 142 of 159
Garland Technology reserves the right to make changes without further notice to any products or data herein to improve reliability, function or design.
Confidential -This document is
Garland Technology
.'s property. This document may not be copied, duplicated and transferred to electronic or mechanized
media or used for any other purpose, including any part thereof or attachment thereto, except as authorized in advance and in writing by
Garland Technology.
9.1.2 M40GBP1U: Bypass Switch 1U Host System LEDs & Switches Specifications
LEDs:
----------------------------FRONT----------------------------------
Two Power LEDs: PS1, PS2
3.
PS1: Green LED will light when power is on and off
if there is a failer in power supply module or when
extracting the power supply module from the system.
4.
PS2: Green LED will light when power is on and off
if there is a failer in power supply module or when
extracting the power supply module from the system.
System Status LEDs: 3 LEDs
4.
Sys OK: System Normal Operation – Light Green.
Who I’m: in rack identification – Blinking
Green.
5.
Sys UP: System Init during power up and during
shutdown – Light Yellow.
6.
ALM: System Alarm – Light Red.
Module Power LEDs:
3.
M1: module1 power on – Light Green.M2: module2
power on – Light Green.
4.
M3: module3 power on – Light Green.
--------------------BACK---------------------------------------
One bi-color LED indication that integrated on each power
supply module:
Power Switch On – Green color.
Standby(AC/DC In,Only +5VSB output) - Blinking Green
color.
Power Fail – Red color.
Internal Fan Fail – Blinking Red.
Switches
Push button to power the system (PWR).
From ON to OFF –
Press and hold this push button during 4 second will
perform firmware shutdown
press and hold this push button during 8second will perform
power shutdown.
From OFF to ON – simple push will turn system on.
Reset (RST):
Small micro-switch stand behind hidden hole :
Press and hold for more than 1 sec will perform restart to the
system.
