USER GUIDE
EdgeLens | INT10G8xx56
User Settings -
Displays the current user configuration.
Username & Password
- select to change the local GUI and serial port username
and password (default=admin/gtadmin1). Cannot change if
logged in via TACACS
Authentication Settings
- select to change the login authentication settings
Local Authentication
- enabled by default, may be disabled if TACACS authentication
is enabled
TACACS Authentication
- select to enable TACACS authentication
IP Address
- enter the TACACS server IP address
Secret Word
- enter to use a key on the TACACS server (3-20 characters)
Save
- select to save any changes
Cancel
- select to return to user settings
TACACS Test
- select to test the TACACS authentication
Username
- enter the username defined in the TACACS server
Password
- enter the password defined in the TACACS server
Test
- select to verify username/password authentication to
the TACACS server
TACACS Ping
- select to ping the TACACS server IP address
Network Settings -
Displays the current network configuration.
Edit Settings
- select to change the network settings
Enable DHCP
- select to enable DHCP
IP Address
- displays the management IP address defined at turn up. If
desired a new management IP address may be entered
Mask
- displays the mask defined at turn up. If desired a new mask
may be entered
Gateway
- displays the gateway defined at turn up. If desired a new
gateway may be entered
DNS1
- enter the desired DNS1 server
DNS2
- enter the desired DNS2 server
Save
- select to save any changes
Cancel
- select to return to network settings
Garland Technology | 716.242.8500 |
Copyright © 2020 Garland Technology, LLC. All rights reserved.
5
